LabLynx Wiki

Posted on July 23, 2020 By Robert Payne

This article is about the co-ordination of a ligand to a central atom. For the sense of touch in technology, see Haptic technology.
Ferrocene contains two η5-cyclopentadienyl ligands

In coordination chemistry, hapticity is the coordination of a ligand to a metal center via an uninterrupted and contiguous series of atoms.[1] The hapticity of a ligand is described with the Greek letter η ('eta'). For example, η2 describes a ligand that coordinates through 2 contiguous atoms. In general the η-notation only applies when multiple atoms are coordinated (otherwise the κ-notation is used). In addition, if the ligand coordinates through multiple atoms that are not contiguous then this is considered denticity[2] (not hapticity), and the κ-notation is used once again.[3] When naming complexes care should be taken not to confuse η with μ ('mu'), which relates to bridging ligands.[4][5]

History

The need for additional nomenclature for organometallic compounds became apparent in the mid-1950s when Dunitz, Orgel, and Rich described the structure of the "sandwich complex" ferrocene by X-ray crystallography[6] where an iron atom is "sandwiched" between two parallel cyclopentadienyl rings. Cotton later proposed the term hapticity derived from the adjectival prefix hapto (from the Greek haptein, to fasten, denoting contact or combination) placed before the name of the olefin,[7] where the Greek letter η (eta) is used to denote the number of contiguous atoms of a ligand that bind to a metal center. The term is usually employed to refer to ligands containing extended π-systems or where agostic bonding is not obvious from the formula.

Historically important compounds where the ligands are described with hapticity

Examples

The η-notation is encountered in many coordination compounds:

  • Side-on bonding of molecules containing σ-bonds like H2:
  • Side-on bonded ligands containing multiple bonded atoms, e.g. ethylene in Zeise's salt or with fullerene, which is bonded through donation of the π-bonding electrons:
    • K[PtCl3(η2-C2H4)].H2O
  • Related complexes containing bridging π-ligands:
    • (μ-η2:η2-C2H2)Co2(CO)6 and (Cp*2Sm)2(μ-η2:η2-N2)[10]
    • Dioxygen in bis{(trispyrazolylborato)copper(II)}(μ-η2:η2-O2),
Note that with some bridging ligands, an alternative bridging mode is observed, e.g. κ1,κ1, like in (Me3SiCH2)3V(μ-N2-κ1(N),κ1(N′))V(CH2SiMe3)3 contains a bridging dinitrogen molecule, where the molecule is end-on coordinated to the two metal centers (see hapticity vs. denticity).
  • The bonding of π-bonded species can be extended over several atoms, e.g. in allyl, butadiene ligands, but also in cyclopentadienyl or benzene rings can share their electrons.
  • Apparent violations of the 18-electron rule sometimes are explicable in compounds with unusual hapticities:
    • The 18-VE complex (η5-C5H5)Fe(η1-C5H5)(CO)2 contains one η5 bonded cyclopentadienyl, and one η1 bonded cyclopentadienyl.
    • Reduction of the 18-VE compound [Ru(η6-C6Me6)2]2+ (where both aromatic rings are bonded in an η6-coordination), results in another 18-VE compound: [Ru(η6-C6Me6)(η4-C6Me6)].
  • Examples of polyhapto coordinated heterocyclic and inorganic rings: Cr(η5-C4H4S)(CO)3 contains the sulfur heterocycle thiophene and Cr(η6-B3N3Me6)(CO)3 contains a coordinated inorganic ring (B3N3 ring).
Structure of (η3-C5Me5)2Mo(N)(N3).[11]

Electrons donated by "π-ligands" versus hapticity

Ligand Electrons
contributed
(neutral counting)		 Electrons
contributed
(ionic counting)
η1-allyl 1 2
η3-allyl
cyclopropenyl		 3 4
η2-butadiene 2 2
η4-butadiene 4 4
η1-cyclopentadienyl 1 2
η3-cyclopentadienyl 3 4
η5-cyclopentadienyl
pentadienyl
cyclohexadienyl		 5 6
η2-benzene 2 2
η4-benzene 4 4
η6-benzene 6 6
η7-cycloheptatrienyl 7 6 or 10
η8-cyclooctatetraenyl 8 10

Changes in hapticity

The hapticity of a ligand can change in the course of a reaction.[12] E.g. in a redox reaction:

Here one of the η6-benzene rings changes to a η4-benzene.

Similarly hapticity can change during a substitution reaction:

Here the η5-cyclopentadienyl changes to an η3-cyclopentadienyl, giving room on the metal for an extra 2-electron donating ligand 'L'. Removal of one molecule of CO and again donation of two more electrons by the cyclopentadienyl ligand restores the η5-cyclopentadienyl. The so-called indenyl effect also describes changes in hapticity in a substitution reaction.

Hapticity vs. denticity

Hapticity must be distinguished from denticity. Polydentate ligands coordinate via multiple coordination sites within the ligand. In this case the coordinating atoms are identified using the κ-notation, as for example seen in coordination of 1,2-bis(diphenylphosphino)ethane (Ph2PCH2CH2PPh2), to NiCl2 as dichloro[ethane-1,2-diylbis(diphenylphosphane)-κ2P]nickel(II). If the coordinating atoms are contiguous (connected to each other), the η-notation is used, as e.g. in titanocene dichloride: dichlorobis(η5-2,4-cyclopentadien-1-yl)titanium.[13]

Hapticity and fluxionality

Molecules with polyhapto ligands are often fluxional, also known as stereochemically non-rigid. Two classes of fluxionality are prevalent for organometallic complexes of polyhapto ligands:

  • Case 1, typically: when the hapticity value is less than the number of sp2 carbon atoms. In such situations, the metal will often migrate from carbon to carbon, maintaining the same net hapticity. The η1-C5H5 ligand in (η5-C5H5)Fe( η1-C5H5)(CO)2 rearranges rapidly in solution such that Fe binds alternatingly to each carbon atom in the η1-C5H5 ligand. This reaction is degenerate and, in the jargon of organic chemistry, it is an example of a sigmatropic rearrangement.[citation needed] A related example is Bis(cyclooctatetraene)iron, in which the η4- and η6-C8H8 rings interconvert.
  • Case 2, typically: complexes containing cyclic polyhapto ligands with maximized hapticity. Such ligands tend to rotate. A famous example is ferrocene,[14] Fe(η5-C5H5)2, wherein the Cp rings rotate with a low energy barrier about the principal axis of the molecule that "skewers" each ring (see rotational symmetry). This "ring torsion" explains, inter alia, why only one isomer can be isolated for Fe(η5-C5H4Br)2 since the torsional barrier is very low.

References

  1. ^ IUPAC, Compendium of Chemical Terminology, 2nd ed. (the "Gold Book") (1997). Online corrected version: (2006–) "η (eta or hapto) in inorganic nomenclature". doi:10.1351/goldbook.H01881
  2. ^ IUPAC, Compendium of Chemical Terminology, 2nd ed. (the "Gold Book") (1997). Online corrected version: (2006–) "denticity". doi:10.1351/goldbook.D01594
  3. ^ IUPAC, Compendium of Chemical Terminology, 2nd ed. (the "Gold Book") (1997). Online corrected version: (2006–) "κ (kappa) in inorganic nomenclature". doi:10.1351/goldbook.K03366
  4. ^ IUPAC, Compendium of Chemical Terminology, 2nd ed. (the "Gold Book") (1997). Online corrected version: (2006–) "bridging ligand". doi:10.1351/goldbook.B00741
  5. ^ IUPAC, Compendium of Chemical Terminology, 2nd ed. (the "Gold Book") (1997). Online corrected version: (2006–) "µ- (mu) in inorganic nomenclature". doi:10.1351/goldbook.M03659
  6. ^ J. Dunitz; L. Orgel; A. Rich (1956). "The crystal structure of ferrocene". Acta Crystallographica. 9 (4): 373–5. doi:10.1107/S0365110X56001091.
  7. ^ F. A. Cotton (1968). "Proposed nomenclature for olefin-metal and other organometallic complexes". J. Am. Chem. Soc. 90 (22): 6230–6232. doi:10.1021/ja01024a059.
  8. ^ a b Kubas, Gregory J. (March 1988). "Molecular hydrogen complexes: coordination of a σ bond to transition metals". Accounts of Chemical Research. 21 (3): 120–128. doi:10.1021/ar00147a005.
  9. ^ a b Kubas, Gregory J. (2001). Metal Dihydrogen and σ-Bond Complexes - Structure, Theory, and Reactivity (1 ed.). New York: Kluwer Academic/Plenum Publishers. ISBN 978-0-306-46465-2. LCCN 00059283.
  10. ^ D. Sutton (1993). "Organometallic diazo compounds". Chem. Rev. 93 (3): 995–1022. doi:10.1021/cr00019a008.
  11. ^ Jun Ho Shin; Brian M. Bridgewater; David G. Churchill; Mu-Hyun Baik; Richard A. Friesner; Gerard Parkin (2001). "An Experimental and Computational Analysis of the Formation of the Terminal Nitrido Complex (η3-Cp*)2Mo(N)(N3) by Elimination of N2 from Cp*2Mo(N3)2: The Barrier to Elimination Is Strongly Influenced by the exo versus endo Configuration of the Azide Ligand". J. Am. Chem. Soc. 123 (41): 10111–10112. doi:10.1021/ja011416v.
  12. ^ Huttner, Gottfried; Lange, Siegfried; Fischer, Ernst O. (1971). "Molecular Structure of Bis(Hexamethylbenzene)-Ruthenium(0)". Angewandte Chemie International Edition in English. 10 (8): 556–557. doi:10.1002/anie.197105561.
  13. ^ "IR-9.2.4.1 Coordination Compounds: Describing the Constitution of Coordination Compounds: Specifying donor atoms: General" (PDF). Nomenclature of Inorganic Chemistry – Recommendations 1990 (the 'Red Book') (Draft March 2004 ed.). IUPAC. 2004. p. 16.
  14. ^ Bunker, P.R. (1965). "The Vibrational Selection Rules and Torsional Barrier of Ferrocene". Molecular Physics. 9 (3): 247–255. doi:10.1080/00268976500100321.
source: https://en.wikipedia.org/wiki/Hapticity

    by Robert Payne

    Follow me opinions Website

    Related Posts