Knowledge Base Wiki

In metrology, the realisation of a unit of measure is the conversion of its definition into reality.^[1] The International vocabulary of metrology identifies three distinct methods of realisation:

1. Realisation of a measurement unit from its definition.
2. Reproduction of measurement standards.
3. Adopting a particular artefact as a standard.

The International Bureau of Weights and Measures maintains the techniques for realisation of the base units in the International System of Units (SI).^[2]

The Oxford English Dictionary defines the word "realise" (also spelt "realize") as "to convert (something imagined, planned, etc.) into real existence or fact".^[1] The International vocabulary of metrology identifies three distinct ways in which this is done – the first being the realisation of a measurement unit from its definition, the second the reproduction of measurement standards and the third the process of actually adopting a particular artefact as a standard.^[3]

The realisation of time has gone through three phases. During both the first and second phases, man used solar time – during the first phase, realisation of time was by observing the Earth's rotation using such devices as the sundial or astrolabe. During the second phase actual timing devices such as hourglasses or clocks were used. If the user needed to know time-of-day rather than elapsed time, clocks were synchronised with astronomical time. The third phase made use of clocks that were sufficiently accurate that they could measure variations in the Earth's rotation – such clocks taking over from the rotation of the earth as the prime measure of time.

• Sundials and astrolabes

• Accuracy of clocks

• Radiation frequency and SI

Units of length, along with mass (or weight) and time, are one of the earliest quantities that was measured by man. Historically two distinct approaches were used – one was to use a naturally occurring phenomenon such as a particular seed or part of the human body, the other was to use a standard length that was held by a community leader.

• Natural units – barleycorn, feet
• Regal units – measures held by ruler
• Using speed of light

An example of a modern realisation is the realisation of the metre in terms of optical frequency standards.^[4]

• Jugs etc. in ancient times
• Not a base unit in SI

• Grains
• Artefacts held by governments (e.g. the International Prototype of the Kilogram)
• Kibble balance and Avogadro experiment

• Silver nitrate deposits
• force between conductors
• charge on the electron

• freezing & boiling water
• Non-linearity etc.
• Boltzmann constant

• Sensitivity of the eye

• Development of the mole