Type a search term to find related articles by LIMS subject matter experts gathered from the most trusted and dynamic collaboration tools in the laboratory informatics industry.
A password, sometimes called a passcode, is secret data, typically a string of characters, usually used to confirm a user's identity. Traditionally, passwords were expected to be memorized,[1] but the large number of password-protected services that a typical individual accesses can make memorization of unique passwords for each service impractical.[2] Using the terminology of the NIST Digital Identity Guidelines,[3] the secret is held by a party called the claimant while the party verifying the identity of the claimant is called the verifier. When the claimant successfully demonstrates knowledge of the password to the verifier through an established authentication protocol,[4] the verifier is able to infer the claimant's identity.
In general, a password is an arbitrary string of characters including letters, digits, or other symbols. If the permissible characters are constrained to be numeric, the corresponding secret is sometimes called a personal identification number (PIN).
Despite its name, a password does not need to be an actual word; indeed, a non-word (in the dictionary sense) may be harder to guess, which is a desirable property of passwords. A memorized secret consisting of a sequence of words or other text separated by spaces is sometimes called a passphrase. A passphrase is similar to a password in usage, but the former is generally longer for added security.[5]
Passwords have been used since ancient times. Sentries would challenge those wishing to enter an area to supply a password or watchword, and would only allow a person or group to pass if they knew the password. Polybius describes the system for the distribution of watchwords in the Roman military as follows:
The way in which they secure the passing round of the watchword for the night is as follows: from the tenth maniple of each class of infantry and cavalry, the maniple which is encamped at the lower end of the street, a man is chosen who is relieved from guard duty, and he attends every day at sunset at the tent of the tribune, and receiving from him the watchword—that is a wooden tablet with the word inscribed on it – takes his leave, and on returning to his quarters passes on the watchword and tablet before witnesses to the commander of the next maniple, who in turn passes it to the one next to him. All do the same until it reaches the first maniples, those encamped near the tents of the tribunes. These latter are obliged to deliver the tablet to the tribunes before dark. So that if all those issued are returned, the tribune knows that the watchword has been given to all the maniples, and has passed through all on its way back to him. If any one of them is missing, he makes inquiry at once, as he knows by the marks from what quarter the tablet has not returned, and whoever is responsible for the stoppage meets with the punishment he merits.[6]
Passwords in military use evolved to include not just a password, but a password and a counterpassword; for example in the opening days of the Battle of Normandy, paratroopers of the U.S. 101st Airborne Division used a password—flash—which was presented as a challenge, and answered with the correct response—thunder. The challenge and response were changed every three days. American paratroopers also famously used a device known as a "cricket" on D-Day in place of a password system as a temporarily unique method of identification; one metallic click given by the device in lieu of a password was to be met by two clicks in reply.[7]
Passwords have been used with computers since the earliest days of computing. The Compatible Time-Sharing System (CTSS), an operating system introduced at MIT in 1961, was the first computer system to implement password login.[8][9] CTSS had a LOGIN command that requested a user password. "After typing PASSWORD, the system turns off the printing mechanism, if possible, so that the user may type in his password with privacy."[10] In the early 1970s, Robert Morris developed a system of storing login passwords in a hashed form as part of the Unix operating system. The system was based on a simulated Hagelin rotor crypto machine, and first appeared in 6th Edition Unix in 1974. A later version of his algorithm, known as crypt(3), used a 12-bit salt and invoked a modified form of the DES algorithm 25 times to reduce the risk of pre-computed dictionary attacks.[11]
In modern times, user names and passwords are commonly used by people during a log in process that controls access to protected computer operating systems, mobile phones, cable TV decoders, automated teller machines (ATMs), etc. A typical computer user has passwords for many purposes: logging into accounts, retrieving e-mail, accessing applications, databases, networks, web sites, and even reading the morning newspaper online.
The easier a password is for the owner to remember generally means it will be easier for an attacker to guess.[12] However, passwords that are difficult to remember may also reduce the security of a system because (a) users might need to write down or electronically store the password, (b) users will need frequent password resets and (c) users are more likely to re-use the same password across different accounts. Similarly, the more stringent the password requirements, such as "have a mix of uppercase and lowercase letters and digits" or "change it monthly", the greater the degree to which users will subvert the system.[13] Others argue longer passwords provide more security (e.g., entropy) than shorter passwords with a wide variety of characters.[14]
In The Memorability and Security of Passwords,[15] Jeff Yan et al. examine the effect of advice given to users about a good choice of password. They found that passwords based on thinking of a phrase and taking the first letter of each word are just as memorable as naively selected passwords, and just as hard to crack as randomly generated passwords.
Combining two or more unrelated words and altering some of the letters to special characters or numbers is another good method,[16] but a single dictionary word is not. Having a personally designed algorithm for generating obscure passwords is another good method.[17]
However, asking users to remember a password consisting of a "mix of uppercase and lowercase characters" is similar to asking them to remember a sequence of bits: hard to remember, and only a little bit harder to crack (e.g. only 128 times harder to crack for 7-letter passwords, less if the user simply capitalises one of the letters). Asking users to use "both letters and digits" will often lead to easy-to-guess substitutions such as 'E' → '3' and 'I' → '1', substitutions that are well known to attackers. Similarly typing the password one keyboard row higher is a common trick known to attackers.[18]
In 2013, Google released a list of the most common password types, all of which are considered insecure because they are too easy to guess (especially after researching an individual on social media), which includes:[19]
Traditional advice to memorize passwords and never write them down has become a challenge because of the sheer number of passwords users of computers and the internet are expected to maintain. One survey concluded that the average user has around 100 passwords.[2] To manage the proliferation of passwords, some users employ the same password for multiple accounts, a dangerous practice since a data breach in one account could compromise the rest. Less risky alternatives include the use of password managers, single sign-on systems and simply keeping paper lists of less critical passwords.[20] Such practices can reduce the number of passwords that must be memorized, such as the password manager's master password, to a more manageable number.
The security of a password-protected system depends on several factors. The overall system must be designed for sound security, with protection against computer viruses, man-in-the-middle attacks and the like. Physical security issues are also a concern, from deterring shoulder surfing to more sophisticated physical threats such as video cameras and keyboard sniffers. Passwords should be chosen so that they are hard for an attacker to guess and hard for an attacker to discover using any of the available automatic attack schemes.[21]
Nowadays, it is a common practice for computer systems to hide passwords as they are typed. The purpose of this measure is to prevent bystanders from reading the password; however, some argue that this practice may lead to mistakes and stress, encouraging users to choose weak passwords. As an alternative, users should have the option to show or hide passwords as they type them.[21]
Effective access control provisions may force extreme measures on criminals seeking to acquire a password or biometric token.[22] Less extreme measures include extortion, rubber hose cryptanalysis, and side channel attack.
Some specific password management issues that must be considered when thinking about, choosing, and handling, a password follow.
The rate at which an attacker can submit guessed passwords to the system is a key factor in determining system security. Some systems impose a time-out of several seconds after a small number (e.g., three) of failed password entry attempts, also known as throttling.[3] : 63B Sec 5.2.2 In the absence of other vulnerabilities, such systems can be effectively secure with relatively simple passwords if they have been well chosen and are not easily guessed.[23]
Many systems store a cryptographic hash of the password. If an attacker gets access to the file of hashed passwords guessing can be done offline, rapidly testing candidate passwords against the true password's hash value. In the example of a web-server, an online attacker can guess only at the rate at which the server will respond, while an off-line attacker (who gains access to the file) can guess at a rate limited only by the hardware on which the attack is running and the strength of the algorithm used to create the hash.
Passwords that are used to generate cryptographic keys (e.g., for disk encryption or Wi-Fi security) can also be subjected to high rate guessing, known as password cracking. Lists of common passwords are widely available and can make password attacks very efficient. Security in such situations depends on using passwords or passphrases of adequate complexity, making such an attack computationally infeasible for the attacker. Some systems, such as PGP and Wi-Fi WPA, apply a computation-intensive hash to the password to slow such attacks, in a technique known as key stretching.
An alternative to limiting the rate at which an attacker can make guesses on a password is to limit the total number of guesses that can be made. The password can be disabled, requiring a reset, after a small number of consecutive bad guesses (say 5); and the user may be required to change the password after a larger cumulative number of bad guesses (say 30), to prevent an attacker from making an arbitrarily large number of bad guesses by interspersing them between good guesses made by the legitimate password owner.[24] Attackers may conversely use knowledge of this mitigation to implement a denial of service attack against the user by intentionally locking the user out of their own device; this denial of service may open other avenues for the attacker to manipulate the situation to their advantage via social engineering.
Some computer systems store user passwords as plaintext, against which to compare user logon attempts. If an attacker gains access to such an internal password store, all passwords—and so all user accounts—will be compromised. If some users employ the same password for accounts on different systems, those will be compromised as well.
More secure systems store each password in a cryptographically protected form, so access to the actual password will still be difficult for a snooper who gains internal access to the system, while validation of user access attempts remains possible. The most secure do not store passwords at all, but a one-way derivation, such as a polynomial, modulus, or an advanced hash function.[14] Roger Needham invented the now-common approach of storing only a "hashed" form of the plaintext password.[25][26] When a user types in a password on such a system, the password handling software runs through a cryptographic hash algorithm, and if the hash value generated from the user's entry matches the hash stored in the password database, the user is permitted access. The hash value is created by applying a cryptographic hash function to a string consisting of the submitted password and, in many implementations, another value known as a salt. A salt prevents attackers from easily building a list of hash values for common passwords and prevents password cracking efforts from scaling across all users.[27] MD5 and SHA1 are frequently used cryptographic hash functions, but they are not recommended for password hashing unless they are used as part of a larger construction such as in PBKDF2.[28]
The stored data—sometimes called the "password verifier" or the "password hash"—is often stored in Modular Crypt Format or RFC 2307 hash format, sometimes in the /etc/passwd file or the /etc/shadow file.[29]
The main storage methods for passwords are plain text, hashed, hashed and salted, and reversibly encrypted.[30] If an attacker gains access to the password file, then if it is stored as plain text, no cracking is necessary. If it is hashed but not salted then it is vulnerable to rainbow table attacks (which are more efficient than cracking). If it is reversibly encrypted then if the attacker gets the decryption key along with the file no cracking is necessary, while if he fails to get the key cracking is not possible. Thus, of the common storage formats for passwords only when passwords have been salted and hashed is cracking both necessary and possible.[30]
If a cryptographic hash function is well designed, it is computationally infeasible to reverse the function to recover a plaintext password. An attacker can, however, use widely available tools to attempt to guess the passwords. These tools work by hashing possible passwords and comparing the result of each guess to the actual password hashes. If the attacker finds a match, they know that their guess is the actual password for the associated user. Password cracking tools can operate by brute force (i.e. trying every possible combination of characters) or by hashing every word from a list; large lists of possible passwords in many languages are widely available on the Internet.[14] The existence of password cracking tools allows attackers to easily recover poorly chosen passwords. In particular, attackers can quickly recover passwords that are short, dictionary words, simple variations on dictionary words, or that use easily guessable patterns.[31] A modified version of the DES algorithm was used as the basis for the password hashing algorithm in early Unix systems.[32] The crypt algorithm used a 12-bit salt value so that each user's hash was unique and iterated the DES algorithm 25 times in order to make the hash function slower, both measures intended to frustrate automated guessing attacks.[32] The user's password was used as a key to encrypt a fixed value. More recent Unix or Unix-like systems (e.g., Linux or the various BSD systems) use more secure password hashing algorithms such as PBKDF2, bcrypt, and scrypt, which have large salts and an adjustable cost or number of iterations.[33] A poorly designed hash function can make attacks feasible even if a strong password is chosen. LM hash is a widely deployed and insecure example.[34]
Passwords are vulnerable to interception (i.e., "snooping") while being transmitted to the authenticating machine or person. If the password is carried as electrical signals on unsecured physical wiring between the user access point and the central system controlling the password database, it is subject to snooping by wiretapping methods. If it is carried as packeted data over the Internet, anyone able to watch the packets containing the logon information can snoop with a very low probability of detection.
Email is sometimes used to distribute passwords but this is generally an insecure method. Since most email is sent as plaintext, a message containing a password is readable without effort during transport by any eavesdropper. Further, the message will be stored as plaintext on at least two computers: the sender's and the recipient's. If it passes through intermediate systems during its travels, it will probably be stored on there as well, at least for some time, and may be copied to backup, cache or history files on any of these systems.
Using client-side encryption will only protect transmission from the mail handling system server to the client machine. Previous or subsequent relays of the email will not be protected and the email will probably be stored on multiple computers, certainly on the originating and receiving computers, most often in clear text.
The risk of interception of passwords sent over the Internet can be reduced by, among other approaches, using cryptographic protection. The most widely used is the Transport Layer Security (TLS, previously called SSL) feature built into most current Internet browsers. Most browsers alert the user of a TLS/SSL-protected exchange with a server by displaying a closed lock icon, or some other sign, when TLS is in use. There are several other techniques in use.
There is a conflict between stored hashed-passwords and hash-based challenge–response authentication; the latter requires a client to prove to a server that they know what the shared secret (i.e., password) is, and to do this, the server must be able to obtain the shared secret from its stored form. On many systems (including Unix-type systems) doing remote authentication, the shared secret usually becomes the hashed form and has the serious limitation of exposing passwords to offline guessing attacks. In addition, when the hash is used as a shared secret, an attacker does not need the original password to authenticate remotely; they only need the hash.
Rather than transmitting a password, or transmitting the hash of the password, password-authenticated key agreement systems can perform a zero-knowledge password proof, which proves knowledge of the password without exposing it.
Moving a step further, augmented systems for password-authenticated key agreement (e.g., AMP, B-SPEKE, PAK-Z, SRP-6) avoid both the conflict and limitation of hash-based methods. An augmented system allows a client to prove knowledge of the password to a server, where the server knows only a (not exactly) hashed password, and where the un-hashed password is required to gain access.
Usually, a system must provide a way to change a password, either because a user believes the current password has been (or might have been) compromised, or as a precautionary measure. If a new password is passed to the system in unencrypted form, security can be lost (e.g., via wiretapping) before the new password can even be installed in the password database and if the new password is given to a compromised employee, little is gained. Some websites include the user-selected password in an unencrypted confirmation e-mail message, with the obvious increased vulnerability.
Identity management systems are increasingly used to automate the issuance of replacements for lost passwords, a feature called self-service password reset. The user's identity is verified by asking questions and comparing the answers to ones previously stored (i.e., when the account was opened).
Some password reset questions ask for personal information that could be found on social media, such as mother's maiden name. As a result, some security experts recommend either making up one's own questions or giving false answers.[35]
"Password aging" is a feature of some operating systems which forces users to change passwords frequently (e.g., quarterly, monthly or even more often). Such policies usually provoke user protest and foot-dragging at best and hostility at worst. There is often an increase in the number of people who note down the password and leave it where it can easily be found, as well as help desk calls to reset a forgotten password. Users may use simpler passwords or develop variation patterns on a consistent theme to keep their passwords memorable.[36] Because of these issues, there is some debate as to whether password aging is effective.[37] Changing a password will not prevent abuse in most cases, since the abuse would often be immediately noticeable. However, if someone may have had access to the password through some means, such as sharing a computer or breaching a different site, changing the password limits the window for abuse.[38]
Allotting separate passwords to each user of a system is preferable to having a single password shared by legitimate users of the system, certainly from a security viewpoint. This is partly because users are more willing to tell another person (who may not be authorized) a shared password than one exclusively for their use. Single passwords are also much less convenient to change because many people need to be told at the same time, and they make removal of a particular user's access more difficult, as for instance on graduation or resignation. Separate logins are also often used for accountability, for example to know who changed a piece of data.
Common techniques used to improve the security of computer systems protected by a password include:
Some of the more stringent policy enforcement measures can pose a risk of alienating users, possibly decreasing security as a result.
It is common practice amongst computer users to reuse the same password on multiple sites. This presents a substantial security risk, because an attacker needs to only compromise a single site in order to gain access to other sites the victim uses. This problem is exacerbated by also reusing usernames, and by websites requiring email logins, as it makes it easier for an attacker to track a single user across multiple sites. Password reuse can be avoided or minimized by using mnemonic techniques, writing passwords down on paper, or using a password manager.[43]
It has been argued by Redmond researchers Dinei Florencio and Cormac Herley, together with Paul C. van Oorschot of Carleton University, Canada, that password reuse is inevitable, and that users should reuse passwords for low-security websites (which contain little personal data and no financial information, for example) and instead focus their efforts on remembering long, complex passwords for a few important accounts, such as bank accounts.[44] Similar arguments were made by Forbes in not change passwords as often as many "experts" advise, due to the same limitations in human memory.[36]
Historically, many security experts asked people to memorize their passwords: "Never write down a password". More recently, many security experts such as Bruce Schneier recommend that people use passwords that are too complicated to memorize, write them down on paper, and keep them in a wallet.[45][46][47][48][49][50][51]
Password manager software can also store passwords relatively safely, in an encrypted file sealed with a single master password.
To facilitate estate administration, it is helpful for people to provide a mechanism for their passwords to be communicated to the persons who will administer their affairs in the event of their death. Should a record of accounts and passwords be prepared, care must be taken to ensure that the records are secure, to prevent theft or fraud.[52]
Multi-factor authentication schemes combine passwords (as "knowledge factors") with one or more other means of authentication, to make authentication more secure and less vulnerable to compromised passwords. For example, a simple two-factor login might send a text message, e-mail, automated phone call, or similar alert whenever a login attempt is made, possibly supplying a code that must be entered in addition to a password.[53] More sophisticated factors include such things as hardware tokens and biometric security.
Password rotation is a policy that is commonly implemented with the goal of enhancing computer security. In 2019, Microsoft stated that the practice is "ancient and obsolete".[54][55]
Most organizations specify a password policy that sets requirements for the composition and usage of passwords, typically dictating minimum length, required categories (e.g., upper and lower case, numbers, and special characters), prohibited elements (e.g., use of one's own name, date of birth, address, telephone number). Some governments have national authentication frameworks[56] that define requirements for user authentication to government services, including requirements for passwords.
Many websites enforce standard rules such as minimum and maximum length, but also frequently include composition rules such as featuring at least one capital letter and at least one number/symbol. These latter, more specific rules were largely based on a 2003 report by the National Institute of Standards and Technology (NIST), authored by Bill Burr.[57] It originally proposed the practice of using numbers, obscure characters and capital letters and updating regularly. In a 2017 article in The Wall Street Journal, Burr reported he regrets these proposals and made a mistake when he recommended them.[58]
According to a 2017 rewrite of this NIST report, many websites have rules that actually have the opposite effect on the security of their users. This includes complex composition rules as well as forced password changes after certain periods of time. While these rules have long been widespread, they have also long been seen as annoying and ineffective by both users and cyber-security experts.[59] The NIST recommends people use longer phrases as passwords (and advises websites to raise the maximum password length) instead of hard-to-remember passwords with "illusory complexity" such as "pA55w+rd".[60] A user prevented from using the password "password" may simply choose "Password1" if required to include a number and uppercase letter. Combined with forced periodic password changes, this can lead to passwords that are difficult to remember but easy to crack.[57]
Paul Grassi, one of the 2017 NIST report's authors, further elaborated: "Everyone knows that an exclamation point is a 1, or an I, or the last character of a password. $ is an S or a 5. If we use these well-known tricks, we aren't fooling any adversary. We are simply fooling the database that stores passwords into thinking the user did something good."[59]
Pieris Tsokkis and Eliana Stavrou were able to identify some bad password construction strategies through their research and development of a password generator tool. They came up with eight categories of password construction strategies based on exposed password lists, password cracking tools, and online reports citing the most used passwords. These categories include user-related information, keyboard combinations and patterns, placement strategy, word processing, substitution, capitalization, append dates, and a combination of the previous categories[61]
Attempting to crack passwords by trying as many possibilities as time and money permit is a brute force attack. A related method, rather more efficient in most cases, is a dictionary attack. In a dictionary attack, all words in one or more dictionaries are tested. Lists of common passwords are also typically tested.
Password strength is the likelihood that a password cannot be guessed or discovered, and varies with the attack algorithm used. Cryptologists and computer scientists often refer to the strength or 'hardness' in terms of entropy.[14]
Passwords easily discovered are termed weak or vulnerable; passwords very difficult or impossible to discover are considered strong. There are several programs available for password attack (or even auditing and recovery by systems personnel) such as L0phtCrack, John the Ripper, and Cain; some of which use password design vulnerabilities (as found in the Microsoft LANManager system) to increase efficiency. These programs are sometimes used by system administrators to detect weak passwords proposed by users.
Studies of production computer systems have consistently shown that a large fraction of all user-chosen passwords are readily guessed automatically. For example, Columbia University found 22% of user passwords could be recovered with little effort.[62] According to Bruce Schneier, examining data from a 2006 phishing attack, 55% of MySpace passwords would be crackable in 8 hours using a commercially available Password Recovery Toolkit capable of testing 200,000 passwords per second in 2006.[63] He also reported that the single most common password was password1, confirming yet again the general lack of informed care in choosing passwords among users. (He nevertheless maintained, based on these data, that the general quality of passwords has improved over the years—for example, average length was up to eight characters from under seven in previous surveys, and less than 4% were dictionary words.[64])
The numerous ways in which permanent or semi-permanent passwords can be compromised has prompted the development of other techniques. Some are inadequate in practice, and in any case few have become universally available for users seeking a more secure alternative.[72] A 2012 paper[73] examines why passwords have proved so hard to supplant (despite numerous predictions that they would soon be a thing of the past[74]); in examining thirty representative proposed replacements with respect to security, usability and deployability they conclude "none even retains the full set of benefits that legacy passwords already provide."
"The password is dead" is a recurring idea in computer security. The reasons given often include reference to the usability as well as security problems of passwords. It often accompanies arguments that the replacement of passwords by a more secure means of authentication is both necessary and imminent. This claim has been made by numerous people at least since 2004.[74][86][87][88][89][90][91][92]
Alternatives to passwords include biometrics, two-factor authentication or single sign-on, Microsoft's Cardspace, the Higgins project, the Liberty Alliance, NSTIC, the FIDO Alliance and various Identity 2.0 proposals.[93][94]
However, in spite of these predictions and efforts to replace them passwords are still the dominant form of authentication on the web. In "The Persistence of Passwords", Cormac Herley and Paul van Oorschot suggest that every effort should be made to end the "spectacularly incorrect assumption" that passwords are dead.[95] They argue that "no other single technology matches their combination of cost, immediacy and convenience" and that "passwords are themselves the best fit for many of the scenarios in which they are currently used."
Following this, Bonneau et al. systematically compared web passwords to 35 competing authentication schemes in terms of their usability, deployability, and security.[96][97] Their analysis shows that most schemes do better than passwords on security, some schemes do better and some worse with respect to usability, while every scheme does worse than passwords on deployability. The authors conclude with the following observation: "Marginal gains are often not sufficient to reach the activation energy necessary to overcome significant transition costs, which may provide the best explanation of why we are likely to live considerably longer before seeing the funeral procession for passwords arrive at the cemetery."
{{cite journal}}: Cite journal requires |journal= (help)
{{cite web}}: CS1 maint: bot: original URL status unknown (link). Fred Cohen and Associates. All.net. Retrieved on 20 May 2012.
{{cite web}}: CS1 maint: bot: original URL status unknown (link). cs.columbia.edu
LIMS forum content by LIMS forum members is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License. Based on a work at www.limsforum.com.
