Knowledge Base Wiki

The drum kit
Bass drum Floor tom Snare drum Rack tom Hi-hat Crash cymbal Ride cymbal Splash cymbal China cymbal
Not shown
Bongos Rototoms Octoban Crash/ride cymbal Sizzle cymbal Bell cymbal Swish cymbal Cowbell Jam block Temple blocks Tambourine Tam-tam Mark tree
See also
Drum hardware Drum stick Drum case Trigger Electronic drum Drum module

A crash/ride cymbal is a medium weight, slightly tapered cymbal, normally in the 18–22-inch (460–560 mm) range, designed to serve in a drum kit as both a crash and a ride cymbal.

A ride/crash cymbal may be thought to be the same thing, but is actually different. Despite being similar in design and function to a crash/ride, it is slightly heavier and/or less tapered to optimise the ride rather than the crash function. It is far less common than the crash/ride.

Crash/ride and ride/crash cymbals have several uses:

• In a very small kit, one may be the only suspended cymbal, used as both crash and ride.
  • Some beginners' cymbal packs have only three cymbals: A pair of hi-hats, and a crash/ride.^{[1][unreliable source?]} However most cymbal packs even at entry level have separate ride and crash cymbals, and the drum hardware packs sold with most drum kits include stands for two suspended cymbals.
  • Many early drum kits had only one tom and one cymbal, both mounted on the bass drum. This cymbal would nowadays be called a crash/ride; At the time it would simply have been called a medium, if anything.
• In a large kit, they bridge the gap between the largest crash cymbal and the smallest ride.
• At very soft volumes, one will provide a more conventional ride tone than a full-sized ride cymbal.
• At very loud volumes, they provide fuller and longer crashes than conventional crash cymbals, which may sound for too short a time.