Infrastructure tools to support an effective radiation oncology learning health system

PSoC 1 IC chips
PSoC 1 capacitive sensing development board with MiniProg programmer / debugger
PSoC 5LP development kit

PSoC (programmable system on a chip) is a family of microcontroller integrated circuits by Cypress Semiconductor. These chips include a CPU core and mixed-signal arrays of configurable integrated analog and digital peripherals.

History

In 2002, Cypress began shipping commercial quantities of the PSoC 1.[1] To promote the PSoC, Cypress sponsored a "PSoC Design Challenge" in Circuit Cellar magazine in 2002 and 2004.[2]

In April 2013, Cypress released the fourth generation, PSoC 4. The PSoC 4 features a 32-bit ARM Cortex-M0 CPU, with programmable analog blocks (operational amplifiers and comparators), programmable digital blocks (PLD-based UDBs), programmable routing and flexible GPIO (route any function to any pin), a serial communication block (for SPI, UART, I²C), a timer/counter/PWM block and more.[3]

PSoC is used in devices as simple as Sonicare toothbrushes and Adidas sneakers, and as complex as the TiVo set-top box. One PSoC implements capacitive sensing for the touch-sensitive scroll wheel on the Apple iPod click wheel.[citation needed]

In 2014, Cypress extended the PSoC 4 family by integrating a Bluetooth Low Energy radio along with a PSoC 4 Cortex-M0-based SoC in a single, monolithic die.

In 2016, Cypress released PSoC 4 S-Series, featuring ARM Cortex-M0+ CPU.[4]

Overview

A PSoC integrated circuit is composed of a core, configurable analog and digital blocks, and programmable routing and interconnect. The configurable blocks in a PSoC are the biggest difference from other microcontrollers.

PSoC has three separate memory spaces: paged SRAM for data, Flash memory for instructions and fixed data, and I/O registers for controlling and accessing the configurable logic blocks and functions. The device is created using SONOS technology.

PSoC resembles an ASIC: blocks can be assigned a wide range of functions and interconnected on-chip. Unlike an ASIC, there is no special manufacturing process required to create the custom configuration – only startup code that is created by Cypress' PSoC Designer (for PSoC 1) or PSoC Creator (for PSoC 3 / 4 / 5) IDE.

PSoC resembles an FPGA in that at power up it must be configured, but this configuration occurs by loading instructions from the built-in Flash memory.

PSoC most closely resembles a microcontroller combined with a PLD and programmable analog. Code is executed to interact with the user-specified peripheral functions (called "Components"), using automatically generated APIs and interrupt routines. PSoC Designer or PSoC Creator generate the startup configuration code. Both integrate APIs that initialize the user selected components upon the users needs in a Visual-Studio-like GUI.

Configurable analog and digital blocks

PsoC Block Example

Using configurable analog and digital blocks, designers can create and change mixed-signal embedded applications. The digital blocks are state machines that are configured using the blocks registers. There are two types of digital blocks, Digital Building Blocks (DBBxx) and Digital Communication Blocks (DCBxx). Only the communication blocks can contain serial I/O user modules, such as SPI, UART, etc.

Each digital block is considered an 8-bit resource that designers can configure using pre-built digital functions or user modules (UM), or, by combining blocks, turn them into 16-, 24-, or 32-bit resources. Concatenating UMs together is how 16-bit PWMs and timers are created.

There are two types of analog blocks. The continuous time (CT) blocks are composed of an op-amp circuit and designated as ACBxx where xx is 00–03. The other type is the switch cap (SC) blocks, which allow complex analog signal flows and are designated by ASCxy where x is the row and y is the column of the analog block. Designers can modify and personalize each module to any design.

Programmable routing and interconnect

PSoC mixed-signal arrays' flexible routing allows designers to route signals to and from I/O pins more freely than with many competing microcontrollers. Global buses allow for signal multiplexing and for performing logic operations. Cypress suggests that this allows designers to configure a design and make improvements more easily and faster and with fewer PCB redesigns than a digital logic gate approach or competing microcontrollers with more fixed function pins.

Series

There are five different families of devices, each based around a different microcontroller core:

Bluetooth Low Energy

Starting in 2014, Cypress began offering PSoC 4 BLE devices with integrated Bluetooth Low Energy (Bluetooth Smart). This can be used to create connected products leveraging the analog and digital blocks.[7] Users can add and configure the BLE module directly in PSoC creator. Cypress also provides a complete Bluetooth Low Energy stack licensed from Mindtree with both Peripheral and Central functionality.[8] The PSoC 6 series includes versions with BLE including Bluetooth 5 features including extended range or higher speed.

Summary

PSoC 1 PSoC 3 PSoC 4 PSoC 5/5LP PSoC 6
8-bit M8C core
up to 24 MHz, 4 MIPS
8-bit 8051 core (single-cycle)
up to 67 MHz, 33 MIPS
32-bit ARM Cortex-M0
up to 48 MHz, ? MIPS
32-bit ARM Cortex-M3
up to 80 MHz, 84 MIPS
32-bit ARM Cortex-M4 (up to 150 MHz)
32-bit ARM Cortex-M0+ (opt. up to 100 MHz)
Flash: 4 KB to 32 KB
SRAM: 256 bytes to 2 KB
Flash: 8 KB to 64 KB
SRAM: 3 KB to 8 KB
Flash: 16 KB to 256 KB
SRAM: 2 KB to 32 KB
Flash: 32 KB to 256 KB
SRAM: 8 KB to 64 KB
Flash: 512 KB to 2048 KB
SRAM: 128 KB to 512 KB
expandable using quad SPI
I²C, SPI, UART,
FS USB 2.0
I²C, SPI, UART, LIN,
FS USB 2.0, I²S, CAN
I²C, SPI, UART, CAN
.
I²C, SPI, UART, LIN, CAN,

FS USB 2.0, I²S

I²C, SPI, UART, LIN, BLE (opt.), FS USB 2.0 (opt. host & device)
16 digital PSoC blocks 16 to 24 UDBs (Universal Digital Blocks) 4 to 8 UDBs 20 to 24 UDBs 0 to 12 UDBs
1 Delta-Sigma ADC (6 to 14-bit)

131 ksps @ 8-bit;

1 Sigma-Delta ADC (for capacitive sensing)

Up to two DACs (6 to 8-bit)

1 Delta-Sigma ADC (8 to 20-bit)

192 ksps @ 12-bit;

Up to four DACs (8-bit)

1 SAR ADC (12-bit)

1 Msps @ 12-bit;

Up to two DACs (7 to 8-bit)

1 Delta-Sigma ADC (8 to 20-bit)

192 ksps @12-bit;

2 SAR ADCs (12-bit)

1 Msps @ 12-bit;

Up to four DACs (8-bit)

1 SAR ADC (12-bit) 1 MSPS

1 12 Bit Voltage Mode DAC

Up to 64 I/O Up to 72 I/O Up to 98 I/O Up to 72 I/O Up to 104 I/O
Operation: 1.7 V to 5.25 V
Active: 2 mA,
Sleep: 3 μA
Hibernate: ?
Operation: 0.5 V to 5.5 V
Active: 1.2 mA,
Sleep: 1 μA,
Hibernate: 200 nA
Operation: 1.71 V to 5.5 V
Active: 1.6 mA,
Sleep: 1.3 μA,
Hibernate: 150 nA
Operation: 2.7 V to 5.5 V
Active: 2 mA,
Sleep: 2 μA,
Hibernate: 300 nA
Requires ICE Cube and FlexPods On-chip SWD, Debug On-chip JTAG, SWD, SWV,
Debug, Trace
CY8CKIT-001 Development Kit CY8CKIT-001 Development Kit
CY8CKIT-030 Development Kit
CY8CKIT-040 4000 Pioneer Kit
CY8CKIT-042 4200 Pioneer Kit

CY8CKIT-043 4200M Prototyping Kit

CY8CKIT-044 4200M Pioneer Kit

CY8CKIT-046 4200L Pioneer Kit
CY8CKIT-049 4100 Prototype Kit

CY8CKIT-001 Development Kit
CY8CKIT-050 Development Kit
CY8CKIT-059 Prototype Kit
CY8CKIT-062-BLE Pioneer Kit

Development tools

PSoC Designer

This is the first generation software IDE to design and debug and program the PSoC 1 devices. It introduced unique features including a library of pre-characterized analog and digital peripherals in a drag-and-drop design environment which could then be customized to specific design needs by leveraging the dynamically generated API libraries of code.

PSoC Creator

PSoC Creator is the second generation software IDE to design debug and program the PSoC 3 / 4 / 5 devices. The development IDE is combined with an easy-to-use graphical design editor to form a powerful hardware/software co-design environment. PSoC Creator consists of two basic building blocks. The program allows the user to select, configure and connect existing circuits on the chip and the components which are the equivalent of peripherals on MCUs. What makes PSoC intriguing is the possibility of creating its own application-specific peripherals in hardware. Cypress publishes component packs several times a year. PSoC users get new peripherals for their existing hardware without being charged or having to buy new hardware. PSoC Creator also allows much freedom in the assignment of peripherals to I/O pins.

Cortex-M

Generic ARM development tools for PSoC 4 and PSoC 5.

Documentation

PSoC 4 / 5

The amount of documentation for all ARM chips is daunting, especially for newcomers. The documentation for microcontrollers from past decades would easily be inclusive in a single document, but as chips have evolved so has the documentation grown. The total documentation is especially hard to grasp for all ARM chips since it consists of documents from the IC manufacturer (Cypress Semiconductor) and documents from CPU core vendor (ARM Holdings).

A typical top-down documentation tree is: manufacturer website, manufacturer marketing slides, manufacturer datasheet for the exact physical chip, manufacturer detailed reference manual that describes common peripherals and aspects of a physical chip family, ARM core generic user guide, ARM core technical reference manual, ARM architecture reference manual that describes the instruction set(s).

PSoC 4 / 5 documentation tree (top to bottom)
  1. PSoC website.
  2. PSoC marketing slides.
  3. PSoC datasheet.
  4. PSoC reference manuals.
  5. ARM core website.
  6. ARM core generic user guide.
  7. ARM core technical reference manual.
  8. ARM architecture reference manual.

Cypress Semiconductor has additional documents, such as: evaluation board user manuals, application notes, getting started guides, software library documents, errata, and more. See External Links section for links to official PSoC and ARM documents.

See also

References

Further reading

PSoC Official Documents

ARM Official Documents for PSoC 4 / 5

Other