Informatics Educational Institutions & Programs

Crucible steels like wootz steel and Damascus steel exhibit unique banding patterns because of the intermixed ferrite and cementite alloys in the steel.

Wootz steel is a crucible steel characterized by a pattern of bands and high carbon content. These bands are formed by sheets of microscopic carbides within a tempered martensite or pearlite matrix in higher-carbon steel, or by ferrite and pearlite banding in lower-carbon steels. It was a pioneering steel alloy developed in southern India in the mid-1st millennium BC and exported globally.[1]

History

Wootz steel originated in the mid-1st millennium BC in India, wootz steel was made in Golconda in Telangana, Karnataka and Sri Lanka.[2][3][4][5] The steel was exported as cakes of steely iron that came to be known as "wootz".[6] The method was to heat black magnetite ore in the presence of carbon in a sealed clay crucible inside a charcoal furnace to completely remove slag. An alternative was to smelt the ore first to give wrought iron, then heat and hammer it to remove slag. The carbon source was bamboo and leaves from plants such as Avārai.[6][7] Locals in Sri Lanka adopted the production methods of creating wootz steel from the Cheras by the 5th century BC.[8] In Sri Lanka, this early steel-making method employed a unique wind furnace, driven by the monsoon winds. Production sites from antiquity have emerged, in places such as Anuradhapura, Tissamaharama and Samanalawewa, as well as imported artifacts of ancient iron and steel from Kodumanal. Recent archaeological excavations (2018) of the Yodhawewa site (in Mannar District) discovered the lower half of a spherical furnace, crucible fragments, and lid fragments related to the crucible steel production through the carburization process.[9] In the South East of Sri Lanka, there were some of the oldest iron and steel artifacts and production processes to the island from the classical period.[10][11][12][13]

Trade between India and Sri Lanka through the Arabian Sea introduced wootz steel to Arabia. The term muhannad مهند or hendeyy هندي in pre-Islamic and early Islamic Arabic refers to sword blades made from Indian steel, which were highly prized, and are attested in Arabic poetry. Further trade spread the technology to the city of Damascus, where an industry developed for making weapons of this steel. This led to the development of Damascus steel. The 12th century Arab traveler Edrisi mentioned the "Hinduwani" or Indian steel as the best in the world.[14] Arab accounts also point to the fame of 'Teling' steel, which can be taken to refer to the region of Telangana. The Golconda region of Telangana clearly being the nodal center for the export of wootz steel to West Asia.[14]

Another sign of its reputation is seen in a Persian phrase – to give an "Indian answer", meaning "a cut with an Indian sword".[8] Wootz steel was widely exported and traded throughout ancient Europe and the Arab world, and became particularly famous in the Middle East.[8]

Detail of 17th–18th C. Indian tulwar/shamshir

Development of modern metallurgy

From the 17th century onwards, several European travelers observed the steel manufacturing in South India, at Mysore, Malabar and Golconda. The word "wootz" appears to have originated as a mistranscription of Sanskrit terms; the Sanskrit root word for the alloy is utsa.[15] Another[which?]theory says that the word is a variation of uchcha or ucha[dubious – discuss] ("superior"). According to one theory, the word ukku is based on the meaning "melt, dissolve". Other Dravidian languages have similar-sounding words for steel: ukku in Kannada[16][17] and Telugu, and urukku in Malayalam. When Benjamin Heyne inspected the Indian steel in Ceded Districts and other Kannada-speaking areas, he was informed that the steel was ucha kabbina ("superior iron"), also known as ukku tundu in Mysore.[18][19]

Legends of wootz steel and Damascus swords aroused the curiosity of the European scientific community from the 17th to the 19th century. The use of high-carbon alloys was little known in Europe[20] previously and thus the research into wootz steel played an important role in the development of modern English, French and Russian metallurgy.[21]

In 1790, samples of wootz steel were received by Sir Joseph Banks, president of the British Royal Society, sent by Helenus Scott. These samples were subjected to scientific examination and analysis by several experts.[22][23][24]

Specimens of daggers and other weapons were sent by the Rajas of India to the Great Exhibition in London in 1851 and 1862 International Exhibition. Though the arms of the swords were beautifully decorated and jeweled, they were most highly prized for the quality of their steel. The swords of the Sikhs were said to bear bending and crumpling, and yet be fine and sharp.[8]

Characteristics

Wootz is characterized by a pattern caused by bands of clustered Fe
3C particles made by melting of low levels of carbide-forming elements.[25] Wootz contains greater carbonaceous matter than common qualities of cast steel.[citation needed]

The distinct patterns of wootz steel that can be made through forging are wave, ladder, and rose patterns with finely spaced bands. However, with hammering, dyeing, and etching further customized patterns were made.[26]

The presence of cementite nanowires and carbon nanotubes has been identified by Peter Pepler of TU Dresden in the microstructure of wootz steel.[27] There is a possibility of an abundance of ultrahard metallic carbides in the steel matrix precipitating out in bands. Wootz swords were renowned for their sharpness and toughness.

Composition

T. H. Henry analyzed and recorded the composition of wootz steel samples provided by the Royal School of Mines. Recording:

Wootz steel was analyzed by Michael Faraday and recorded to contain 0.01-0.07% aluminium. Faraday, Messrs (et al.), and Stodart hypothesized that aluminium was needed in the steel and was important in forming the excellent properties of wootz steel. However T. H. Henry deduced that presence of aluminium in the wootz used by these studies was due to slag, forming as silicates. Percy later reiterated that the quality of wootz steel does not depend on the presence of aluminium.[28]

Reproduction research

Wootz steel has been reproduced and studied in depth by the Royal School of Mines.[29] Dr. Pearson was the first to chemically examine wootz in 1795 and he published his contributions to the Philosophical Transactions of the Royal Society.[30]

Russian metallurgist Pavel Petrovich Anosov (see Bulat steel) was almost able to reproduce ancient wootz steel with nearly all of its properties and the steel he created was very similar to traditional wootz.[citation needed] He documented four different methods of producing wootz steel that exhibited traditional patterns.[citation needed] He died before he could fully document and publish his research. Oleg Sherby and Jeff Wadsworth and Lawrence Livermore National Laboratory have all done research, attempting to create steels with characteristics similar to wootz, but without success.[citation needed] J.D Verhoeven and Alfred Pendray reconstructed methods of production, proved the role of impurities of ore in the pattern creation, and reproduced wootz steel with patterns microscopically and visually identical to one of the ancient blade patterns.[citation needed] Reibold et al.'s analyses spoke of the presence of carbon nanotubes enclosing nanowires of cementite, with the trace elements/impurities of vanadium, molybdenum, chromium etc. contributing to their creation, in cycles of heating/cooling/forging. This resulted in a hard high carbon steel that remained malleable[31]

There are smiths who are now consistently producing wootz steel blades visually identical to the old patterns.[32] Steel manufactured in Kutch particularly enjoyed a widespread reputation, similar to those manufactured at Glasgow and Sheffield.[8]

Wootz was made over nearly a 2,000-year period (the oldest sword samples date to around 200 CE)[citation needed] and the methods of production of ingots, the ingredients, and the methods of forging varied from one area to the next. Some wootz blades displayed a pattern, while some did not.[citation needed] Heat treating was quite different from forging, and there were many different patterns that were created by the various smiths who spanned from China to Scandinavia.[citation needed]

With fellow experts, the Georgian-Dutch master armourer Gocha Laghidze developed a new method to reintroduce 'Georgian Damascus steel'. In 2010, he and his colleagues gave a masterclass on this at the Royal Academy of Fine Arts in Antwerp.[33][34]

See also

References

  1. ^ J.-S. Park K. Rajan R. Ramesh (2020). "High-carbon steel and ancient sword-making as observed in a double-edged sword from an Iron Age megalithic burial in Tamil Nadu, India". Archaeometry. 62: 68–80. doi:10.1111/arcm.12503.
  2. ^ Srinivasan, Sharada (15 November 1994). "Wootz crucible steel: a newly discovered production site in India". Papers from the Institute of Archaeology. 5: 49–59. doi:10.5334/pia.60.
  3. ^ Wijepala, W. M. T. B.; Young, Sansfica M.; Ishiga, Hiroaki (1 April 2022). "Reading the archaeometallurgical findings of Yodhawewa site, Sri Lanka: contextualizing with South Asian metal history". Asian Archaeology. 5 (1): 21–39. doi:10.1007/s41826-022-00046-0. ISSN 2520-8101. S2CID 247355036.
  4. ^ Coghlan, Herbert Henery (1977). Notes on prehistoric and early iron in the Old World (2nd ed.). Pitt Rivers Museum. pp. 99–100.
  5. ^ Sasisekharan, B. (1999). "Technology of Iron and Steel in Kodumanal" (PDF). Indian Journal of History of Science. 34 (4). Archived from the original (PDF) on 24 July 2015.
  6. ^ a b Davidson, Hilda Roderick Ellis (1998). The Sword in Anglo-Saxon England: Its Archaeology and Literature. Boydell & Brewer. p. 20. ISBN 978-0-85115-716-0.
  7. ^ Burton, Sir Richard Francis (1884). The Book of the Sword. London: Chatto & Windus. p. 111.
  8. ^ a b c d e Manning, Charlotte Speir. Ancient and Medieval India. Vol. 2. p. 365. ISBN 978-0-543-92943-3.
  9. ^ Wijepala, W. M. T. B.; Young, Sansfica M.; Ishiga, Hiroaki (1 April 2022). "Reading the archaeometallurgical findings of Yodhawewa site, Sri Lanka: contextualizing with South Asian metal history". Asian Archaeology. 5 (1): 21–39. doi:10.1007/s41826-022-00046-0. ISSN 2520-8101. S2CID 247355036.
  10. ^ Hobbies (April 1963) Vol. 68, No.5, p.45, Chicago: Lightner Publishing Company.
  11. ^ Mahathevan, Iravatham (24 June 2010). "An epigraphic perspective on the antiquity of Tamil". The Hindu. The Hindu Group. Retrieved 31 October 2010.
  12. ^ Ragupathy, P. (28 June 2010). "Tissamaharama potsherd evidences ordinary early Tamils among population". Tamilnet. Retrieved 31 October 2010.
  13. ^ "Dinithi" (PDF). Sri Lanka Archaeology. 1 (4). February 2012.[permanent dead link]
  14. ^ a b Srinivasan, Sharada; Ranganathan, Srinivasa (2004). "India's Legendary Wootz Steel: An Advanced Material of the Ancient World". Iron & Steel Heritage of India: 69–82. OCLC 82439861.
  15. ^ Pande, Girija; af Geijerstam, Jan (2002). Tradition and innovation in the history of iron making: an Indo-European perspective. Pahar Parikarma. p. 45. ISBN 978-81-86246-19-1.
  16. ^ Narasimha, Roddam; Srinivasan, J.; Biswas, S. K. (2003). The Dynamics of Technology: Creation and Diffusion of Skills and Knowledge. SAGE Publications. p. 135. ISBN 978-0-7619-9670-5.
  17. ^ Michael Faraday, as quoted by Day, Peter (1 January 1999). The Philosopher's Tree. Bristol, UK: Institute of Physics Publishing. p. 108. ISBN 978-0-7503-0571-6.
  18. ^ Balfour, Edward (1885). The Cyclopædia of India and of Eastern and Southern Asia, Commercial Industrial, and Scientific: Products of the Mineral, Vegetable, and Animal Kingdoms, Useful Arts and Manufactures. Bernard Quaritch. p. 1092.
  19. ^ Jeans, James Stephen (1880). Steel: Its History, Manufacture, Properties and Uses. E. & F.N. Spon. p. 294.
  20. ^ Godfrey, Evelyne; van Nie, Matthijs (2004). "A Germanic ultrahigh carbon steel punch of the Late Roman-Iron Age" (PDF). Journal of Archaeological Science. 31 (8): 1117–25. Bibcode:2004JArSc..31.1117G. doi:10.1016/j.jas.2004.02.002.
  21. ^ Smith, Cyril Stanley (2012). A History of Metallography: The Development of Ideas on the Structure of Metals Before 1890. Literary Licensing. ISBN 978-1-258-47336-5.
  22. ^ Pearson, George (1 January 1795). "Experiments and Observations to Investigate the Nature of a Kind of Steel, Manufactured at Bombay, and There Called Wootz: With Remarks on the Properties and Composition of the Different States of Iron". Philosophical Transactions of the Royal Society of London. 85. Royal Society of London: 322–346. doi:10.1098/rstl.1795.0020. JSTOR 106960.
  23. ^ Mushet, D. (1 January 1805). "Experiments on Wootz". Philosophical Transactions of the Royal Society of London. 95: 163–175. doi:10.1098/rstl.1805.0010. JSTOR 107164. S2CID 115267901.
  24. ^ Hadfield, Robert (1932). "A Research on Faraday's "Steel and Alloys". Philosophical Transactions of the Royal Society of London. 230 (681–693): 221–292. Bibcode:1932RSPTA.230..221H. doi:10.1098/rsta.1932.0007. JSTOR 91231.
  25. ^ Verhoeven, Pendray & Dauksch 1998
  26. ^ Durand-Charre, Madeleine (2004). Microstructure of Steels and Cast Irons. Springer. ISBN 978-3-540-20963-8.
  27. ^ Sanderson, Katharine (15 November 2006). "Sharpest cut from nanotube sword". Nature. doi:10.1038/news061113-11. S2CID 136774602.
  28. ^ Percy, John (1864). Metallurgy: The Art of Extracting Metals from Their Ores, and Adapting Them to Various Purposes of Manufacture. J. Murray. p. 183.
  29. ^ Ure, Andrew (1821). A Dictionary of Chemistry: On the Basis of Mr. Nicholson's, in which the Principles of the Science are Investigated Anew and Its Applications to the Phenomena of Nature, Medicine, Mineralogy, Agriculture, and Manufactures Detailed. Robert Desilver. p. 45.
  30. ^ Neogi, Panchanan (1914). Iron in ancient India. Indian Association for the Cultivation of Science.
  31. ^ Reibold, Marianne; Paufler, Peter; Levin, Aleksandr A.; Kochmann, Werner; Pätzke, Nora; Meyer, Dirk C. (2009). "Discovery of Nanotubes in Ancient Damascus Steel". Physics and Engineering of New Materials. Springer Proceedings in Physics. Vol. 127. Springer. pp. 305–310. Bibcode:2009penm.book..305R. doi:10.1007/978-3-540-88201-5_35. ISBN 978-3-540-88200-8.
  32. ^ Sherby, Oleg; Wadsworth, Jeffrey (23 November 2001). "Ancient blacksmiths, the Iron Age, Damascus steels, and modem metallurgy". Journal of Materials Processing Technology. 117 (3): 347–353. doi:10.1016/S0924-0136(01)00794-4.
  33. ^ Lagidse, Gotscha; Visser, Seerp; Remmen, Klaas, Gotscha (2011). "Bulat, een Wonderstaal". Wapenfeiten (in Dutch) (3).{{cite journal}}: CS1 maint: multiple names: authors list (link)
  34. ^ Nino Lordkipanidze, Georgian Damascus, in special issue of National Geographic, 2021, pp. 138-139

Further reading

source: https://en.wikipedia.org/wiki/Wootz