Search for LIMS content across all our Wiki Knowledge Bases.
Type a search term to find related articles by LIMS subject matter experts gathered from the most trusted and dynamic collaboration tools in the laboratory informatics industry.
In the context of the periodic table a nonmetal is a chemical element that mostly lacks distinctive metallic properties. They range from colorless gases like hydrogen to shiny crystals like iodine. Physically, they are usually lighter (less dense) than elements that form metals and are often poor conductors of heat and electricity. Chemically, nonmetals have relatively high electronegativity or usually attract electrons in a chemical bond with another element, and their oxides tend to be acidic.
Seventeen elements are widely recognized as nonmetals. Additionally, some or all of six borderline elements (metalloids) are sometimes counted as nonmetals.
Most nonmetallic elements were identified in the 18th and 19th centuries. While a distinction between metals and other minerals had existed since antiquity, a basic classification of chemical elements as metallic or nonmetallic emerged only in the late 18th century. Since then about twenty properties have been suggested as criteria for distinguishing nonmetals from metals.
Nonmetallic chemical elements are often described as lacking properties common to metals, namely shininess, pliability, good thermal and electrical conductivity, and a general capacity to form basic oxides.[8][9] There is no widely accepted precise definition;[10] any list of nonmetals is open to debate and revision.[1] The elements included depend on the properties regarded as most representative of nonmetallic or metallic character.
Fourteen elements are almost always recognized as nonmetals:[1][2]
Three more are commonly classed as nonmetals, but some sources list them as "metalloids",[3] a term which refers to elements regarded as intermediate between metals and nonmetals:[11]
Nonmetals vary greatly in appearance, being colorless, colored or shiny.
For the colorless nonmetals (hydrogen, nitrogen, oxygen, and the noble gases), no absorption of light happens in the visible part of the spectrum, and all visible light is transmitted.[15]
The colored nonmetals (sulfur, fluorine, chlorine, bromine) absorb some colors (wavelengths) and transmit the complementary or opposite colors. For example, chlorine's "familiar yellow-green colour ... is due to a broad region of absorption in the violet and blue regions of the spectrum".[16][d] The shininess of boron, graphite (carbon), silicon, black phosphorus, germanium, arsenic, selenium, antimony, tellurium, and iodine[e] is a result of varying degrees of metallic conduction where the electrons can reflect incoming visible light.[19]
About half of nonmetallic elements are gases under standard temperature and pressure; most of the rest are solids. Bromine, the only liquid, is usually topped by a layer of its reddish-brown fumes. The gaseous and liquid nonmetals have very low densities, melting and boiling points, and are poor conductors of heat and electricity.[20] The solid nonmetals have low densities and low mechanical strength (being either hard and brittle, or soft and crumbly),[21] and a wide range of electrical conductivity.[f]
This diversity in form stems from variability in internal structures and bonding arrangements. Covalent nonmetals existing as discrete atoms like xenon, or as small molecules, such as oxygen, sulfur, and bromine, have low melting and boiling points; many are gases at room temperature, as they are held together by weak London dispersion forces acting between their atoms or molecules, although the molecules themselves have strong covalent bonds.[25] In contrast, nonmetals that form extended structures, such as long chains of selenium atoms,[26] sheets of carbon atoms in graphite,[27] or three-dimensional lattices of silicon atoms[28] have higher melting and boiling points, and are all solids, as it takes more energy to overcome their stronger bonding.[29][dubious – discuss] Nonmetals closer to the left or bottom of the periodic table (and so closer to the metals) often have metallic interactions between their molecules, chains, or layers; this occurs in boron,[30] carbon,[31] phosphorus,[32] arsenic,[33] selenium,[34] antimony,[35] tellurium[36] and iodine.[37]
Some general physical differences between elemental metals and nonmetals[20]
Aspect
Metals
Nonmetals
Appearance and form
Shiny if freshly prepared or fractured; few colored;[38] all but one solid[39]
Shiny, colored or transparent;[40] all but one solid or gaseous[39]
Covalently bonded nonmetals often share only the electrons required to achieve a noble gas electron configuration.[43] For example, nitrogen forms diatomic molecules featuring a triple bonds between each atom, both of which thereby attain the configuration of the noble gas neon. Antimony's larger atomic size prevents triple bonding, resulting in buckled layers in which each antimony atom is singly bonded with three other nearby atoms.[44]
Good electrical conductivity occurs when there is metallic bonding,[45] however the electrons in nonmetals are often not metallic.[45] Good electrical and thermal conductivity associated with metallic electrons is seen in carbon (as graphite, along its planes), arsenic, and antimony.[g] Good thermal conductivity occurs in boron, silicon, phosphorus, and germanium;[22] such conductivity is transmitted though vibrations of the crystalline lattices of these elements.[46] Moderate electrical conductivity is observed in the semiconductors[47] boron, silicon, phosphorus, germanium, selenium, tellurium, and iodine.
Many of the nonmetallic elements are hard and brittle,[21] where dislocations cannot readily move so they tend to undergo brittle fracture rather than deforming.[48] Some do deform such as white phosphorus (soft as wax, pliable and can be cut with a knife, at room temperature),[49] in plastic sulfur,[50] and in selenium which can be drawn into wires from its molten state.[51] Graphite is a standard solid lubricant where dislocations move very easily in the basal planes.[52]
Over half of the nonmetallic elements exhibit a range of less stable allotropic forms, each with distinct physical properties.[53] For example, carbon, the most stable form of which is graphite, can manifest as diamond, buckminsterfullerene,[54]amorphous[55] and paracrystalline[56] variations. Allotropes also occur for nitrogen, oxygen, phosphorus, sulfur, selenium and iodine.[57]
Nonmetals have relatively high values of electronegativity, and their oxides are usually acidic. Exceptions may occur if a nonmetal is not very electronegative, or if its oxidation state is low, or both. These non-acidic oxides of nonmetals may be amphoteric (like water, H2O[63]) or neutral (like nitrous oxide, N2O[64][h]), but never basic.
Nonmetals tend to gain electrons during chemical reactions, in contrast to metals which tend to donate electrons. This behavior is related to the stability of electron configurations in the noble gases, which have complete outer shells as summarized by the duet and octet rules of thumb, more correctly explained in terms of valence bond theory.[67]
They typically exhibit higher ionization energies, electron affinities, and standard electrode potentials than metals. Generally, the higher these values are (including electronegativity) the more nonmetallic the element tends to be.[68] For example, the chemically very active nonmetals fluorine, chlorine, bromine, and iodine have an average electronegativity of 3.19—a figure[i] higher than that of any metallic element.
The chemical distinctions between metals and nonmetals is connected to the attractive force between the positive nuclear charge of an individual atom and its negatively charged outer electrons. From left to right across each period of the periodic table, the nuclear charge (number of protons in the atomic nucleus) increases.[69] There is a corresponding reduction in atomic radius[70] as the increased nuclear charge draws the outer electrons closer to the nuclear core.[71] In chemical bonding, nonmetals tend to gain electrons due to their higher nuclear charge, resulting in negatively charged ions.[72]
The number of compounds formed by nonmetals is vast.[73] The first 10 places in a "top 20" table of elements most frequently encountered in 895,501,834 compounds, as listed in the Chemical Abstracts Service register for November 2, 2021, were occupied by nonmetals. Hydrogen, carbon, oxygen, and nitrogen collectively appeared in most (80%) of compounds. Silicon, a metalloid, ranked 11th. The highest-rated metal, with an occurrence frequency of 0.14%, was iron, in 12th place.[74] A few examples of nonmetal compounds are: boric acid (H 3BO 3), used in ceramic glazes;[75]selenocysteine (C 3H 7NO 2Se), the 21st amino acid of life;[76]phosphorus sesquisulfide (P4S3), found in strike anywhere matches;[77] and teflon ((C 2F 4)n), used to create non-stick coatings for pans and other cookware.[78]
Complications
Adding complexity to the chemistry of the nonmetals are anomalies occurring in the first row of each periodic table block; non-uniform periodic trends; higher oxidation states; multiple bond formation; and property overlaps with metals.
First row anomaly
Condensed periodic table highlighting the first row of each block: s p d and f
Starting with hydrogen, the first row anomaly primarily arises from the electron configurations of the elements concerned. Hydrogen is notable for its diverse bonding behaviors. It most commonly forms covalent bonds, but it can also lose its single electron in an aqueous solution, leaving behind a bare proton with tremendous polarizing power.[80] Consequently, this proton can attach itself to the lone electron pair of an oxygen atom in a water molecule, laying the foundation for acid-base chemistry.[81] Moreover, a hydrogen atom in a molecule can form a second, albeit weaker, bond with an atom or group of atoms in another molecule. Such bonding, "helps give snowflakes their hexagonal symmetry, binds DNA into a double helix; shapes the three-dimensional forms of proteins; and even raises water's boiling point high enough to make a decent cup of tea."[82]
Hydrogen and helium, as well as boron through neon, have unusually small atomic radii. This phenomenon arises because the 1s and 2p subshells lack inner analogues (meaning there is no zero shell and no 1p subshell), and they therefore experience less electron-electron exchange interactions, unlike the 3p, 4p, and 5p subshells of heavier elements.[83][dubious – discuss] As a result, ionization energies and electronegativities among these elements are higher than the periodic trends would otherwise suggest. The compact atomic radii of carbon, nitrogen, and oxygen facilitate the formation of double or triple bonds.[84]
While it would normally be expected, on electron configuration consistency grounds, that hydrogen and helium would be placed atop the s-block elements, the significant first row anomaly shown by these two elements justifies alternative placements. Hydrogen is occasionally positioned above fluorine, in group 17, rather than above lithium in group 1. Helium is almost always placed above neon, in group 18, rather than above beryllium in group 2.[85]
Secondary periodicity
An alternation in certain periodic trends, sometimes referred to as secondary periodicity, becomes evident when descending groups 13 to 15, and to a lesser extent, groups 16 and 17.[86][k] Immediately after the first row of d-block metals, from scandium to zinc, the 3d electrons in the p-block elements—specifically, gallium (a metal), germanium, arsenic, selenium, and bromine—prove less effective at shielding the increasing positive nuclear charge.
The Soviet chemist Shchukarev [ru] gives two more tangible examples:[88]
"The toxicity of some arsenic compounds, and the absence of this property in analogous compounds of phosphorus [P] and antimony [Sb]; and the ability of selenic acid [H2SeO4] to bring metallic gold [Au] into solution, and the absence of this property in sulfuric [H2SO4] and [H2TeO4] acids."
Higher oxidation states
Roman numerals such as III, V and VIII denote oxidation states
Some nonmetallic elements exhibit oxidation states that deviate from those predicted by the octet rule, which typically results in an oxidation state of –3 in group 15, –2 in group 16, –1 in group 17, and 0 in group 18. Examples include ammonia NH3, hydrogen sulfide H2S, hydrogen fluoride HF, and elemental xenon Xe. Meanwhile, the maximum possible oxidation state increases from +5 in group 15, to +8 in group 18. The +5 oxidation state is observable from period 2 onward, in compounds such as nitric acid HN(V)O3 and phosphorus pentafluoride PCl5.[l]Higher oxidation states in later groups emerge from period 3 onwards, as seen in sulfur hexafluoride SF6, iodine heptafluoride IF7, and xenon(VIII) tetroxide XeO4. For heavier nonmetals, their larger atomic radii and lower electronegativity values enable the formation of compounds with higher oxidation numbers, supporting higher bulk coordination numbers.[89]
Multiple bond formation
Period 2 nonmetals, particularly carbon, nitrogen, and oxygen, show a propensity to form multiple bonds. The compounds formed by these elements often exhibit unique stoichiometries and structures, as seen in the various nitrogen oxides,[89] which are not commonly found in elements from later periods.
Property overlaps
While certain elements have traditionally been classified as nonmetals and others as metals, some overlapping of properties occurs. Writing early in the twentieth century, by which time the era of modern chemistry had been well-established,[91] Humphrey[92] observed that:
... these two groups, however, are not marked off perfectly sharply from each other; some nonmetals resemble metals in certain of their properties, and some metals approximate in some ways to the non-metals.
Examples of metal-like properties occurring in nonmetallic elements include:
Silicon has an electronegativity (1.9) comparable with metals such as cobalt (1.88), copper (1.9), nickel (1.91) and silver (1.93);[62]
The electrical conductivity of graphite exceeds that of some metals;[n]
Radon is the most metallic of the noble gases and begins to show some cationic behavior, which is unusual for a nonmetal;[96] and
In extreme conditions, just over half of nonmetallic elements can form homopolyatomic cations.[o]
Examples of nonmetal-like properties occurring in metals are:
Tungsten displays some nonmetallic properties, sometimes being brittle, having a high electronegativity, and forming only anions in aqueous solution,[98] and predominately acidic oxides.[9][99]
Gold, the "king of metals" has the highest electrode potential among metals, suggesting a preference for gaining rather than losing electrons. Gold's ionization energy is one of the highest among metals, and its electron affinity and electronegativity are high, with the latter exceeding that of some nonmetals. It forms the Au– auride anion and exhibits a tendency to bond to itself, behaviors which are unexpected for metals. In aurides (MAu, where M = Li–Cs), gold's behavior is similar to that of a halogen.[100] Gold has a large enough nuclear potential that the electrons have to be considered with relativistic effects included which changes some of the properties.[101]
A relatively recent development involves certain compounds of heavier p-block elements, such as silicon, phosphorus, germanium, arsenic and antimony, exhibiting behaviors typically associated with transition metal complexes. This is linked to a small energy gap between their filled and emptymolecular orbitals, which are the regions in a molecule where electrons reside and where they can be available for chemical reactions. In such compounds, this allows for unusual reactivity with small molecules like hydrogen (H2), ammonia (NH3), and ethylene (C2H4), a characteristic previously observed primarily in transition metal compounds. These reactions may open new avenues in catalytic applications.[102]
Types
Nonmetal classification schemes vary widely, with some accommodating as few as two subtypes and others identifying up to seven. For example, the periodic table in the Encyclopaedia Britannica recognizes noble gases, halogens, and other nonmetals, and splits the elements commonly recognized as metalloids between "other metals" and "other nonmetals".[103] On the other hand, seven of twelve color categories on the Royal Society of Chemistry periodic table include nonmetals.[104][p]
Starting on the right side of the periodic table, three types of nonmetals can be recognized:
the relatively inert noble gases—helium, neon, argon, krypton, xenon, radon;[105]
the notably reactive halogen nonmetals—fluorine, chlorine, bromine, iodine;[106] and
the mixed reactivity "unclassified nonmetals", a set with no widely used collective name—hydrogen, carbon, nitrogen, oxygen, phosphorus, sulfur, selenium.[r] The descriptive phrase unclassified nonmetals is used here for convenience.
The elements in a fourth set are sometimes recognized as nonmetals:
the generally unreactive[t] metalloids,[124] sometimes considered a third category distinct from metals and nonmetals—boron, silicon, germanium, arsenic, antimony, tellurium.
While many of the early workers attempted to classify elements none of their classifications were satisfactory. They were divided into metals and nonmetals, but some were soon found to have properties of both. These were called metalloids. This only added to the confusion by making two indistinct divisions where one existed before.[125]
Whiteford & Coffin 1939, Essentials of College Chemistry
The boundaries between these types are not sharp.[u] Carbon, phosphorus, selenium, and iodine border the metalloids and show some metallic character, as does hydrogen.
The greatest discrepancy between authors occurs in metalloid "frontier territory".[127] Some consider metalloids distinct from both metals and nonmetals, while others classify them as nonmetals.[4] Some categorize certain metalloids as metals (e.g., arsenic and antimony due to their similarities to heavy metals).[128][v] Metalloids resemble the elements universally considered "nonmetals" in having relatively low densities, high electronegativity, and similar chemical behavior.[124][w]
Six nonmetals are classified as noble gases: helium, neon, argon, krypton, xenon, and the radioactive radon. In conventional periodic tables they occupy the rightmost column. They are called noble gases due to their exceptionally low chemical reactivity.[105]
These elements exhibit similar properties, characterized by their colorlessness, odorlessness, and nonflammability. Due to their closed outer electron shells, noble gases possess weak interatomic forces of attraction, leading to exceptionally low melting and boiling points.[129] As a consequence, they all exist as gases under standard conditions, even those with atomic masses surpassing many typically solid elements.[130]
Chemically, the noble gases exhibit relatively high ionization energies, negligible or negative electron affinities, and high to very high electronegativities. The number of compounds formed by noble gases is in the hundreds and continues to expand,[131] with most of these compounds involving the combination of oxygen or fluorine with either krypton, xenon, or radon.[132]
Highly reactive sodium metal (Na, left) combines with corrosive halogen nonmetal chlorine gas (Cl, right) to form stable, unreactive table salt (NaCl, center).
While the halogen nonmetals are notably reactive and corrosive elements, they can also be found in everyday compounds like toothpaste (NaF); common table salt (NaCl); swimming pool disinfectant (NaBr); and food supplements (KI). The term "halogen" itself means "salt former".[133]
Chemically, the halogen nonmetals exhibit high ionization energies, electron affinities, and electronegativity values, and are mostly relatively strong oxidizing agents.[134] These characteristics contribute to their corrosive nature.[135] All four elements tend to form primarily ionic compounds with metals,[136] in contrast to the remaining nonmetals (except for oxygen) which tend to form primarily covalent compounds with metals.[x] The highly reactive and strongly electronegative nature of the halogen nonmetals epitomizes nonmetallic character.[140]
Unclassified nonmetals
Hydrogen behaves in some respects like a metallic element and in others like a nonmetal.[142] Like a metallic element it can, for example, form a solvated cation in aqueous solution;[143] it can substitute for alkali metals in compounds such as the chlorides (NaCl cf. HCl) and nitrates (KNO3 cf. HNO3), and in certain alkali metal complexes[144][145] as a nonmetal.[146] It attains this configuration by forming a covalent or ionic bond[147] or, if it has initially given up its electron, by attaching itself to a lone pair of electrons.[148]
Some or all of these nonmetals share several properties. Being generally less reactive than the halogens,[149] most of them can occur naturally in the environment.[150] They have significant roles in biology[151] and geochemistry.[152] Collectively, their physical and chemical characteristics can be described as "moderately non-metallic".[152] Sometimes they have corrosive aspects. Carbon corrosion can occur in fuel cells.[153] Untreated selenium in soils can lead to the formation of corrosive hydrogen selenide gas.[154] Very different, when combined with metals, the unclassified nonmetals can form interstitial or refractory compounds[155] due to their relatively small atomic radii and sufficiently low ionization energies.[152] They also exhibit a tendency to bond to themselves, particularly in solid compounds.[156] Additionally, diagonal periodic table relationships among these nonmetals mirror similar relationships among the metalloids.[157]
Abundance, extraction, and uses
Abundance
Approximate composition (top three components by weight)
The volatile noble gas nonmetal elements are less abundant in the atmosphere than expected based their overall abundance due to cosmic nucleosynthesis. Mechanisms to explain this difference is an important aspect of planetary science.[162] Even within that challenge, the nonmetal element Xe is unexpectedly depleted. A possible explanation comes from theoretical models of the high pressures in the Earth's core suggest there may be around 1013 tons of xenon, in the form of stable XeFe3 and XeNi3intermetallic compounds.[163]
Five nonmetals—hydrogen, carbon, nitrogen, oxygen, and silicon—form the bulk of the directly observable structure of the Earth: about 73% of the crust, 93% of the biomass, 96% of the hydrosphere, and over 99% of the atmosphere, as shown in the accompanying table. Silicon and oxygen form highly stable tetrahedral structures, known as silicates. Here, "the powerful bond that unites the oxygen and silicon ions is the cement that holds the Earth's crust together."[164]
In the biomass, the relative abundance of the first four nonmetals (and phosphorus, sulfur, and selenium marginally) is attributed to a combination of relatively small atomic size, and sufficient spare electrons. These two properties enable them to bind to one another and "some other elements, to produce a molecular soup sufficient to build a self-replicating system."[165]
Extraction
Nine of the 23 nonmetallic elements are gases, or form compounds that are gases, and are extracted from natural gas or liquid air. These elements include hydrogen, helium, nitrogen, oxygen, neon, sulfur, argon, krypton, and xenon. For example, nitrogen and oxygen are extracted from air through fractional distillation of liquid air. This method capitalizes on their different boiling points to separate them efficiently.[166] Sulfur was extracted using the Frasch process, which involved injecting superheated water into underground deposits to melt the sulfur, which is then pumped to the surface. This technique leveraged sulfur's low melting point relative to other geological materials. It is now obtained by reacting the hydrogen sulfide in natural gas, with oxygen. Water is formed, leaving the sulfur behind.[167]
Nonmetallic elements are extracted from the following sources:[150]
Liquids (9): nitrogen, oxygen, neon, argon, krypton and xenon from liquid air; chlorine, bromine and iodine from brine
Solids (12): boron, from borates; carbon occurs naturally as graphite; silicon, from silica; phosphorus, from phosphates; iodine, from sodium iodate; radon, as a decay product from uranium ores; fluorine, from fluorite;[y] germanium, arsenic, selenium, antimony and tellurium, from sulfides.
Uses
Uses of nonmetals and non-metallic elements are broadly categorized as domestic, industrial, attenuative (lubricative, retarding, insulating or cooling), and agricultural
Cylinders containing argon gas for use in extinguishing fire without damaging computer server equipment
Taxonomical history
Background
Around 340 BCE, in Book III of his treatise Meteorology, the ancient Greek philosopher Aristotle categorized substances found within the Earth into metals and "fossiles".[aa] The latter category included various minerals such as realgar, ochre, ruddle, sulfur, cinnabar, and other substances that he referred to as "stones which cannot be melted".[185]
Until the Middle Ages the classification of minerals remained largely unchanged, albeit with varying terminology. In the fourteenth century, the English alchemist Richardus Anglicus expanded upon the classification of minerals in his work Correctorium Alchemiae. In this text, he proposed the existence of two primary types of minerals. The first category, which he referred to as "major minerals", included well-known metals such as gold, silver, copper, tin, lead, and iron. The second category, labeled "minor minerals", encompassed substances like salts, atramenta (iron sulfate), alums, vitriol, arsenic, orpiment, sulfur, and similar substances that were not metallic bodies.[186]
The term "nonmetallic" dates back to at least the 16th century. In his 1566 medical treatise, French physician Loys de L'Aunay distinguished substances from plant sources based on whether they originated from metallic or non-metallic soils.[187]
Later, the French chemist Nicolas Lémery discussed metallic and nonmetallic minerals in his work Universal Treatise on Simple Drugs, Arranged Alphabetically published in 1699. In his writings, he contemplated whether the substance "cadmia" belonged to either the first category, akin to cobaltum (cobaltite), or the second category, exemplified by what was then known as calamine—a mixed ore containing zinc carbonate and silicate.[188]
French nobleman and chemist Antoine Lavoisier (1743–1794), with a page of the English translation of his 1789 Traité élémentaire de chimie,[189] listing the elemental gases oxygen, hydrogen and nitrogen (and erroneously including light and caloric); the nonmetallic substances sulfur, phosphorus, and carbon; and the chloride, fluoride and borate ions
Just as the ancients distinguished metals from other minerals, similar distinctions developed as the modern idea of chemical elements emerged in the late 1700s. French chemist Antoine Lavoisier published the first modern list of chemical elements in his revolutionary[190] 1789 Traité élémentaire de chimie. The 33 elements known to Lavoisier were categorized into four distinct groups, including gases, metallic substances, nonmetallic substances that form acids when oxidized,[191] and earths (heat-resistant oxides).[192] Lavoisier's work gained widespread recognition and was republished in twenty-three editions across six languages within its first seventeen years, significantly advancing the understanding of chemistry in Europe and America.[193]
In 1802 the term "metalloids" was introduced for elements with the physical properties of metals but the chemical properties of non-metals.[194] However,
in 1811, the Swedish chemist Berzelius used the term "metalloids"[195] to describe all nonmetallic elements, noting their ability to form negatively charged ions with oxygen in aqueous solutions.[196][197]
Thus in 1864, the "Manual of Metalloids" divided all elements into either metals or metalloids, with the latter group including elements now called nonmetals.[198]: 31 Reviews of the book indicated that the term "metalloids" was still endorsed by leading authorities,[199] but there were reservations about its appropriateness. While Berzelius' terminology gained significant acceptance,[200] it later faced criticism from some who found it counterintuitive,[197] misapplied,[201] or even invalid.[202][203] The idea of designating elements like arsenic as metalloids had been considered.[199] By as early as 1866, some authors began preferring the term "nonmetal" over "metalloid" to describe nonmetallic elements.[204] In 1875, Kemshead[205] observed that elements were categorized into two groups: non-metals (or metalloids) and metals. He noted that the term "non-metal", despite its compound nature, was more precise and had become universally accepted as the nomenclature of choice.
Development of types
In 1844, Alphonse Dupasquier [fr], a French doctor, pharmacist, and chemist,[206] established a basic taxonomy of nonmetals to aid in their study. He wrote:[207]
They will be divided into four groups or sections, as in the following:
Organogens—oxygen, nitrogen, hydrogen, carbon
Sulphuroids—sulfur, selenium, phosphorus
Chloroides—fluorine, chlorine, bromine, iodine
Boroids—boron, silicon.
Dupasquier's quartet parallels the modern nonmetal types. The organogens and sulphuroids are akin to the unclassified nonmetals. The chloroides were later called halogens.[208] The boroids eventually evolved into the metalloids, with this classification beginning from as early as 1864.[199] The then unknown noble gases were recognized as a distinct nonmetal group after being discovered in the late 1800s.[209]
His taxonomy was noted for its natural basis.[210][ab] That said, it was a significant departure from other contemporary classifications, since it grouped together oxygen, nitrogen, hydrogen, and carbon.[212]
In 1828 and 1859, the French chemist Dumas classified nonmetals as (1) hydrogen; (2) fluorine to iodine; (3) oxygen to sulfur; (4) nitrogen to arsenic; and (5) carbon, boron and silicon,[213] thereby anticipating the vertical groupings of Mendeleev's 1871 periodic table. Dumas' five classes fall into modern groups 1, 17, 16, 15, and 14 to
13 respectively.
Suggested distinguishing criteria
Properties suggested to distinguish metals from nonmetals
Much of the early analyses were phenomenological, and a variety of physical, chemical, and atomic properties have been suggested for distinguishing metals from nonmetals (or other bodies); a comprehensive early set of characteristics was stated by Rev Thaddeus Mason Harrisn in the 1803 Minor Encyclopedia .[214]
METAL, in natural history and chemistry, the name of a class of simple bodies; of which it is observed, that they posses; a lustre; that they are opaque; that they arc fusible, or may be melted; that their specific gravity is greater than that of any other bodies yet discovered; that they are better conductors of electricity, than any other body; that they are malleable, or capable of being extended and flattened by the hammer; and that they are ductile or tenacious, that is, capable of being drawn out into threads or wires.
Some criteria did not last long; for instance in 1809, the British chemist and inventor Humphry Davy isolated sodium and potassium,[231] their low densities contrasted with their metallic appearance, so the density property was tenuous although these metals was firmly established by their chemical properties.[232]
Johnson[233] has a similar approach to Mason, distinguishing between metals and nonmetals on the basis of their physical states, electrical conductivity, mechanical properties, and the acid-base nature of their oxides:
gaseous elements are nonmetals (hydrogen, nitrogen, oxygen, fluorine, chlorine and the noble gases);
liquids (mercury, bromine) are either metallic or nonmetallic: mercury, as a good conductor, is a metal; bromine, with its poor conductivity, is a nonmetal;
solids are either ductile and malleable, hard and brittle, or soft and crumbly:
a. ductile and malleable elements are metals;
b. hard and brittle elements include boron, silicon and germanium, which are semiconductors and therefore not metals; and
c. soft and crumbly elements include carbon, phosphorus, sulfur, arsenic, antimony,[ag] tellurium and iodine, which have acidic oxides indicative of nonmetallic character.[ah]
Density and electronegativity in the periodic table[ai]
Several authors[238] have noted that nonmetals generally have low densities and high electronegativity. The accompanying table, using a threshold of 7 g/cm3 for density and 1.9 for electronegativity (revised Pauling), shows that all nonmetals have low density and high electronegativity. In contrast, all metals have either high density or low electronegativity (or both). Goldwhite and Spielman[239] added that, "... lighter elements tend to be more electronegative than heavier ones." The average electronegativity for the elements in the table with densities less than 7 gm/cm3 (metals and nonmetals) is 1.97 compared to 1.66 for the metals having densities of more than 7 gm/cm3.
There is not full agreement about the use of phenomenological properties. Emsley[240] pointed out the complexity of this task, asserting that no single property alone can unequivocally assign elements to either the metal or nonmetal category. Some authors divide elements into metals, metalloids, and nonmetals, but Oderberg[241] disagrees, arguing that by the principles of categorization, anything not classified as a metal should be considered a nonmetal.
Kneen and colleagues[242] proposed that the classification of nonmetals can be achieved by establishing a single criterion for metallicity. They acknowledged that various plausible classifications exist and emphasized that while these classifications may differ to some extent, they would generally agree on the categorization of nonmetals. The describe electrical conductivity as the key property, arguing that this is the most common approach.
One of the most commonly recognized properties used is the temperature coefficient of resistivity, the effect of heating on electrical resistance and conductivity. As temperature rises, the conductivity of metals decreases while that of nonmetals increases.[243] However, plutonium, carbon, arsenic, and antimony appear to defy the norm. When plutonium (a metal) is heated within a temperature range of −175 to +125 °C its conductivity increases.[244] Similarly, despite its common classification as a nonmetallic element, carbon (as graphite) is a semimetal which when heated experiences a decrease in electrical conductivity.[245] Arsenic and antimony, which are occasionally classified as nonmetallic elements are also semimetals, and show behavior similar to carbon.[246][dubious – discuss]
Comparison of selected properties
The two tables in this section list some of the properties of five types of elements (noble gases, halogen nonmetals, unclassified nonmetals, metalloids and, for comparison, metals) based on their most stable forms at standard temperature and pressure. The dashed lines around the columns for metalloids signify that the treatment of these elements as a distinct type can vary depending on the author, or classification scheme in use.
† Hydrogen can also form alloy-like hydrides[145]
‡ The labels low, moderate, high, and very high are arbitrarily based on the value spans listed in the table
^These six (boron, silicon, germanium, arsenic, antimony, and tellurium) are the elements commonly recognized as "metalloids",[3] a category sometimes counted as a subcategory of nonmetals and sometimes as a category separate from both metals and nonmetals.[4]
^At higher temperatures and pressures the numbers of nonmetals can be called into question. For example, when germanium melts it changes from a semiconducting metalloid to a metallic conductor with an electrical conductivity similar to that of liquid mercury.[13] At a high enough pressure, sodium (a metal) becomes a non-conducting insulator.[14]
^The absorbed light may be converted to heat or re-emitted in all directions so that the emission spectrum is thousands of times weaker than the incident light radiation.[17]
^Solid iodine has a silvery metallic appearance under white light at room temperature. At ordinary and higher temperatures it sublimes from the solid phase directly into a violet-colored vapor.[18]
^The solid nonmetals have electrical conductivity values ranging from 10−18 S•cm−1 for sulfur[22] to 3 × 104 in graphite[23] or 3.9 × 104 for arsenic;[24] cf. 0.69 × 104 for manganese to 63 × 104 for silver, both metals.[22] The conductivity of graphite (a nonmetal) and arsenic (a metalloid nonmetal) exceeds that of manganese. Such overlaps show that it can be difficult to draw a clear line between metals and nonmetals.
^Thermal conductivity values for metals range from 6.3 W m−1 K−1 for neptunium to 429 for silver; cf. antimony 24.3, arsenic 50, and carbon 2000.[22] Electrical conductivity values of metals range from 0.69 S•cm−1 × 104 for manganese to 63 × 104 for silver; cf. carbon 3 × 104,[23] arsenic 3.9 × 104 and antimony 2.3 × 104.[22]
^While CO and NO are commonly referred to as being neutral, CO is a slightly acidic oxide, reacting with bases to produce formates (CO + OH− → HCOO−);[65] and in water, NO reacts with oxygen to form nitrous acid HNO2 (4NO + O2 + 2H2O → 4HNO2).[66]
^Electronegativity values of fluorine to iodine are: 3.98 + 3.16 + 2.96 + 2.66 = 12.76/4 3.19.
^Helium is shown above beryllium for electron configuration consistency purposes; as a noble gas it is usually placed above neon, in group 18.
^The net result is an even-odd difference between periods (except in the s-block): elements in even periods have smaller atomic radii and prefer to lose fewer electrons, while elements in odd periods (except the first) differ in the opposite direction. Many properties in the p-block then show a zigzag rather than a smooth trend along the group. For example, phosphorus and antimony in odd periods of group 15 readily reach the +5 oxidation state, whereas nitrogen, arsenic, and bismuth in even periods prefer to stay at +3.[87]
^Oxidation states, which denote hypothetical charges for conceptualizing electron distribution in chemical bonding, do not necessarily reflect the net charge of molecules or ions. This concept is illustrated by anions such as NO3−, where the nitrogen atom is considered to have an oxidation state of +5 due to the distribution of electrons. However, the net charge of the ion remains −1. Such observations underscore the role of oxidation states in describing electron loss or gain within bonding contexts, distinct from indicating the actual electrical charge, particularly in covalently bonded molecules.
^Greenwood[93] commented that: "The extent to which metallic elements mimic boron (in having fewer electrons than orbitals available for bonding) has been a fruitful cohering concept in the development of metalloborane chemistry ... Indeed, metals have been referred to as "honorary boron atoms" or even as "flexiboron atoms". The converse of this relationship is clearly also valid."
^For example, the conductivity of graphite is 3 × 104 S•cm−1.[94] whereas that of manganese is 6.9 × 103 S•cm−1.[95]
^A homopolyatomic cation consists of two or more atoms of the same element bonded together and carrying a positive charge, for example, N5+, O2+ and Cl4+. This is unusual behavior for nonmetals since cation formation is normally associated with metals, and nonmetals are normally associated with anion formation. Homopolyatomic cations are further known for carbon, phosphorus, antimony, sulfur, selenium, tellurium, bromine, iodine and xenon.[97]
^ Of the twelve categories in the Royal Society periodic table, five only show up with the metal filter, three only with the nonmetal filter, and four with both filters. Interestingly, the six elements marked as metalloids (boron, silicon, germanium, arsenic, antimony, and tellurium) show under both filters. Six other elements (113–118: nihonium, flerovium, moscovium, livermorium, tennessine, and oganesson), whose status is unknown, also show up under both filters but are not included in any of the twelve color categories.
^The quote marks are not found in the source; they are used here to make it clear that the source employs the word non-metals as a formal term for the subset of chemical elements in question, rather than applying to nonmetals generally.
^Varying configurations of these nonmetals have been referred to as, for example, basic nonmetals,[107] bioelements,[108] central nonmetals,[109] CHNOPS,[110] essential elements,[111] "non-metals",[112][q] orphan nonmetals,[113] or redox nonmetals.[114]
^Arsenic is stable in dry air. Extended exposure in moist air results in the formation of a black surface coating. "Arsenic is not readily attacked by water, alkaline solutions or non-oxidizing acids".[119] It can occasionally be found in nature in an uncombined form.[120] It has a positive standard reduction potential (As → As3+ + 3e = +0.30 V), corresponding to a classification of semi-noble metal.[121]
^"Crystalline boron is relatively inert."[115] Silicon "is generally highly unreactive."[116] "Germanium is a relatively inert semimetal."[117] "Pure arsenic is also relatively inert."[118][s] "Metallic antimony is … inert at room temperature."[122] "Compared to S and Se, Te has relatively low chemical reactivity."[123]
^Boundary fuzziness and overlaps often occur in classification schemes.[126]
^Jones takes a philosophical or pragmatic view to these questions. He writes: "Though classification is an essential feature of all branches of science, there are always hard cases at the boundaries. The boundary of a class is rarely sharp... Scientists should not lose sleep over the hard cases. As long as a classification system is beneficial to economy of description, to structuring knowledge and to our understanding, and hard cases constitute a small minority, then keep it. If the system becomes less than useful, then scrap it and replace it with a system based on different shared characteristics."[126]
^Metal oxides are usually somewhat ionic, depending upon the metal element electropositivity.[137] On the other hand, oxides of metals with high oxidation states are often either polymeric or covalent.[138] A polymeric oxide has a linked structure composed of multiple repeating units.[139]
^Exceptionally, a study reported in 2012 noted the presence of 0.04% native fluorine (F 2) by weight in antozonite, attributing these inclusions to radiation from tiny amounts of uranium.[168]
^Radon sometimes occurs as potentially hazardous indoor pollutant[170]
^The term "fossile" is not to be confused with the modern usage of fossil to refer to the preserved remains, impression, or trace of any once-living thing.
^A natural classification was based on "all the characters of the substances to be classified as opposed to the 'artificial classifications' based on one single character" such as the affinity of metals for oxygen. "A natural classification in chemistry would consider the most numerous and most essential analogies."[211]
^The Goldhammer-Herzfeld ratio is roughly equal to the cube of the atomic radius divided by the molar volume.[217] More specifically, it is the ratio of the force holding an individual atom's outer electrons in place with the forces on the same electrons from interactions between the atoms in the solid or liquid element. When the interatomic forces are greater than, or equal to, the atomic force, outer electron itinerancy is indicated and metallic behavior is predicted. Otherwise nonmetallic behavior is anticipated.
^ Sonorousness is making a ringing sound when struck.
^ Liquid range is the difference between melting point and boiling point.
^The Mott parameter is N1/3ɑ*H where N the number of atoms per unit volume, and ɑ*H "is their effective size, usually taken as the effective Bohr radius of the maximum in the outermost (valence) electron probability distribution." In ambient conditions, a value of 0.45 is given for the value for the dividing line between metals and nonmetals.
^While antimony trioxide is usually listed as being amphoteric its very weak acid properties dominate over those of a very weak base.[234]
^Johnson counted boron as a nonmetal and silicon, germanium, arsenic, antimony, tellurium, polonium and astatine as "semimetals" i.e. metalloids.
^(a) The table includes elements up to einsteinium (99) except for astatine (85) and francium (87), with densities and most electronegativities from Aylward and Findlay;[235] Electronegativities of noble gases are from Rahm, Zeng and Hoffmann.[236] (b) A survey of definitions of the term "heavy metal" reported density criteria ranging from above 3.5 g/cm3 to above 7 g/cm3;[237] (c) Vernon specified a minimum electronegativity of 1.9 for the metalloids, on the revised Pauling scale;[3]
^All four have less stable non-brittle forms: carbon as exfoliated (expanded) graphite,[256][257] and as carbon nanotube wire;[258] phosphorus as white phosphorus (soft as wax, pliable and can be cut with a knife, at room temperature);[49] sulfur as plastic sulfur;[50] and selenium as selenium wires.[51]
^Metals have electrical conductivity values of from 6.9×103 S•cm−1 for manganese to 6.3×105 for silver.[260]
^Metalloids have electrical conductivity values of from 1.5×10−6 S•cm−1 for boron to 3.9×104 for arsenic.[261]
^Unclassified nonmetals have electrical conductivity values of from ca. 1×10−18 S•cm−1 for the elemental gases to 3×104 in graphite.[94]
^Halogen nonmetals have electrical conductivity values of from ca. 1×10−18 S•cm−1 for F and Cl to 1.7×10−8 S•cm−1 for iodine.[94][262]
^Elemental gases have electrical conductivity values of ca. 1×10−18 S•cm−1.[94]
^Metalloids always give "compounds less acidic in character than the corresponding compounds of the [typical] nonmetals."[247]
^Arsenic trioxide reacts with sulfur trioxide, forming arsenic "sulfate" As2(SO4)3.[270] This substance is covalent in nature rather than ionic;[271] it is also given as As2O3·3SO3.[272]
^NO 2, N 2O 5, SO 3, SeO 3 are strongly acidic.[273]
^H2O, CO, NO, N2O are neutral oxides; CO and N2O are "formally the anhydrides of formic and hyponitrous acid, respectively viz. CO + H2O → H2CO2 (HCOOH, formic acid); N2O + H2O → H2N2O2 (hyponitrous acid)."[274]
^Metals that form glasses are: vanadium; molybdenum, tungsten; alumnium, indium, thallium; tin, lead; and bismuth.[278]
^Unclassified nonmetals that form glasses are phosphorus, sulfur, selenium;[278]CO2 forms a glass at 40 GPa.[280]
^Disodium helide (Na2He) is a compound of helium and sodium that is stable at high pressures above 113 GPa. Argon forms an alloy with nickel, at 140 GPa and close to 1,500 K, however at this pressure argon is no longer a noble gas.[288]
^Values for the noble gases are from Rahm, Zeng and Hoffmann.[236]
^ abSteudel 2020, p. 43: Steudel's monograph is an updated translation of the fifth German edition of 2013, incorporating the literature up to Spring 2019.
^Taniguchi et al. 1984, p. 867: "... black phosphorus ... [is] characterized by the wide valence bands with rather delocalized nature."; Carmalt & Norman 1998, p. 7: "Phosphorus ... should therefore be expected to have some metalloid properties."; Du et al. 2010: Interlayer interactions in black phosphorus, which are attributed to van der Waals-Keesom forces, are thought to contribute to the smaller band gap of the bulk material (calculated 0.19 eV; observed 0.3 eV) as opposed to the larger band gap of a single layer (calculated ~0.75 eV).
^Steudel 2020, p. 601: "... Considerable orbital overlap can be expected. Apparently, intermolecular multicenter bonds exist in crystalline iodine that extend throughout the layer and lead to the delocalization of electrons akin to that in metals. This explains certain physical properties of iodine: the dark color, the luster and a weak electric conductivity, which is 3400 times stronger within the layers then perpendicular to them. Crystalline iodine is thus a two-dimensional semiconductor."; Segal 1989, p. 481: "Iodine exhibits some metallic properties ..."
^Crawford 1968, p. 540; Benner, Ricardo & Carrigan 2018, pp. 167–168: "The stability of the carbon-carbon bond... has made it the first choice element to scaffold biomolecules. Hydrogen is needed for many reasons; at the very least, it terminates C-C chains. Heteroatoms (atoms that are neither carbon nor hydrogen) determine the reactivity of carbon-scaffolded biomolecules. In... life, these are oxygen, nitrogen and, to a lesser extent, sulfur, phosphorus, selenium, and an occasional halogen."
Baker et al. PS 1962, Chemistry and You, Lyons and Carnahan, Chicago
Barton AFM 2021, States of Matter, States of Mind, CRC Press, Boca Raton, ISBN 978-0-7503-0418-4
Beach FC (ed.) 1911, The Americana: A universal reference library, vol. XIII, Mel–New, Metalloid, Scientific American Compiling Department, New York
Beard A, Battenberg, C & Sutker BJ 2021, "Flame retardants", in Ullmann's Encyclopedia of Industrial Chemistry,doi:10.1002/14356007.a11_123.pub2
Beiser A 1987, Concepts of modern physics, 4th ed., McGraw-Hill, New York, ISBN 978-0-07-004473-9
Benner SA, Ricardo A & Carrigan MA 2018, "Is there a common chemical model for life in the universe?", in Cleland CE & Bedau MA (eds.), The Nature of Life: Classical and Contemporary Perspectives from Philosophy and Science, Cambridge University Press, Cambridge, ISBN 978-1-108-72206-3
Benzhen et al. 2020, Metals and non-metals in the periodic table, Philosophical Transactions of the Royal Society A, vol. 378, 20200213
Berger LI 1997, Semiconductor Materials, CRC Press, Boca Raton, ISBN 978-0-8493-8912-2
Bertomeu-Sánchez JR, Garcia-Belmar A & Bensaude-Vincent B 2002, "Looking for an order of things: Textbooks and chemical classifications in nineteenth century France", Ambix, vol. 49, no. 3, doi:10.1179/amb.2002.49.3.227
Berzelius JJ 1811, 'Essai sur la nomenclature chimique', Journal de Physique, de Chimie, d'Histoire Naturelle, vol. LXXIII, pp. 253‒286
Bhuwalka et al. 2021, "Characterizing the changes in material use due to vehicle electrification", Environmental Science & Technology vol. 55, no. 14, doi:10.1021/acs.est.1c00970
Bogoroditskii NP & Pasynkov VV 1967, Radio and Electronic Materials, Iliffe Books, London
Bohlmann R 1992, "Synthesis of halides", in Winterfeldt E (ed.), Heteroatom manipulation, Pergamon Press, Oxford, ISBN 978-0-08-091249-3
Boreskov GK 2003, Heterogeneous Catalysis, Nova Science, New York, ISBN 978-1-59033-864-3
Brady JE & Senese F 2009, Chemistry: The study of Matter and its Changes, 5th ed., John Wiley & Sons, New York, ISBN 978-0-470-57642-7
Brande WT 1821, A Manual of Chemistry, vol. II, John Murray, London
Brandt HG & Weiler H, 2000, "Welding and cutting", in Ullmann's Encyclopedia of Industrial Chemistry,doi:10.1002/14356007.a28_203
Brannt WT 1919, Metal Worker's Handy-book of Receipts and Processes, HC Baird & Company, Philadelphia
Brown TL et al. 2014, Chemistry: The Central Science, 3rd ed., Pearson Australia: Sydney, ISBN 978-1-4425-5460-3
Burford N, Passmore J & Sanders JCP 1989, "The preparation, structure, and energetics of homopolyatomic cations of groups 16 (the chalcogens) and 17 (the halogens)", in Liebman JF & Greenberg A (eds.), From atoms to polymers: isoelectronic analogies, VCH, New York, ISBN 978-0-89573-711-3
Bynum WF, Browne J & Porter R 1981 (eds), Dictionary of the History of Science, Princeton University Press, Princeton, ISBN 978-0-691-08287-5
Cao C et al. 2021, "Understanding periodic and non-periodic chemistry in periodic tables", Frontiers in Chemistry, vol. 8, no. 813, doi:10.3389/fchem.2020.00813
Carapella SC 1968, "Arsenic" in Hampel CA (ed.), The Encyclopedia of the Chemical Elements, Reinhold, New York
Carmalt CJ & Norman NC 1998, "Arsenic, antimony and bismuth: Some general properties and aspects of periodicity", in Norman NC (ed.), Chemistry of Arsenic, Antimony and Bismuth, Blackie Academic & Professional, London, pp. 1–38, ISBN 0-7514-0389-X
Carrasco et al. 2023, "Antimonene: a tuneable post-graphene material for advanced applications in optoelectronics, catalysis, energy and biomedicine", Chemical Society Reviews, vol. 52, no. 4, p. 1288–1330, doi:10.1039/d2cs00570k
Challoner J 2014, The Elements: The New Guide to the Building Blocks of our Universe, Carlton Publishing Group, ISBN 978-0-233-00436-5
Chambers E 1743, in "Metal", Cyclopedia: Or an Universal Dictionary of Arts and Sciences (etc.), vol. 2, D Midwinter, London
Chambers C & Holliday AK 1982, Inorganic Chemistry, Butterworth & Co., London, ISBN 978-0-408-10822-5
Chandra X-ray Observatory 2018, Abundance Pie Chart, accessed 26 October 2023
Chapin FS, Matson PA & Vitousek PM 2011, Earth's climate system, in Principles of Terrestrial Ecosystem Ecology, Springer, New York, ISBN 978-1-4419-9503-2
Charlier J-C, Gonze X, Michenaud J-P 1994, "First-principles study of the stacking effect on the electronic properties of graphite(s)", Carbon, vol. 32, no. 2, pp. 289–99, doi:10.1016/0008-6223(94)90192-9
Chedd G 1969, Half-way elements: The technology of metalloids, Double Day, Garden City, NY
Clugston MJ & Flemming R 2000, Advanced Chemistry, Oxford University Press, Oxford, ISBN 978-0-19-914633-8
Cockell C 2019, The Equations of Life: How Physics Shapes Evolution, Atlantic Books, London, ISBN 978-1-78649-304-0
Cook CG 1923, Chemistry in Everyday Life: With Laboratory Manual, D Appleton, New York
Cotton A et al. 1999, Advanced Inorganic Chemistry, 6th ed., Wiley, New York, ISBN 978-0-471-19957-1
Cousins DM, Davidson MG & García-Vivó D 2013, "Unprecedented participation of a four-coordinate hydrogen atom in the cubane core of lithium and sodium phenolates", Chemical Communications, vol. 49, doi:10.1039/C3CC47393G
Cox PA 1997, The Elements: Their Origins, Abundance, and Distribution, Oxford University Press, Oxford, ISBN 978-0-19-855298-7
Cox T 2004, Inorganic Chemistry, 2nd ed., BIOS Scientific Publishers, London, ISBN 978-1-85996-289-3
Crawford FH 1968, Introduction to the Science of Physics, Harcourt, Brace & World, New York
Crichton R 2012, Biological Inorganic Chemistry: A New Introduction to Molecular Structure and Function, 2nd ed., Elsevier, Amsterdam, ISBN 978-0-444-53783-6
de Clave E 1651, Nouvelle Lumière philosophique des vrais principes et élémens de nature, et qualité d'iceux, contre l'opinion commune, Olivier de Varennes, Paris
Daniel PL & Rapp RA 1976, "Halogen corrosion of metals", in Fontana MG & Staehle RW (eds.), Advances in Corrosion Science and Technology, Springer, Boston, doi:10.1007/978-1-4615-9062-0_2
de L'Aunay L 1566, Responce au discours de maistre Iacques Grevin, docteur de Paris, qu'il a escript contre le livre de maistre Loys de l'Aunay, medecin en la Rochelle, touchant la faculté de l'antimoine (Response to the Speech of Master Jacques Grévin,... Which He Wrote Against the Book of Master Loys de L'Aunay,... Touching the Faculty of Antimony), De l'Imprimerie de Barthelemi Berton, La Rochelle
Davis et al. 2006, "Atomic iodine lasers", in Endo M & Walter RF (eds) 2006, Gas Lasers, CRC Press, Boca Raton, Florida, ISBN 978-0-470-19565-9
DeKock RL & Gray HB 1989, Chemical structure and bonding, University Science Books, Mill Valley, CA, ISBN 978-0-935702-61-3
Dejonghe L 1998, "Zinc–lead deposits of Belgium", Ore Geology Reviews, vol. 12, no. 5, 329–354, doi:10.1016/s0169-1368(98)00007-9
Donohue J 1982, The Structures of the Elements, Robert E. Krieger, Malabar, Florida, ISBN 978-0-89874-230-5
Dorsey MG 2023, Holding Their Breath: How the Allies Confronted the Threat of Chemical Warfare in World War II, Cornell University Press, Ithaca, New York, pp. 12–13, ISBN 978-1-5017-6837-8
Du Y, Ouyang C, Shi S & Lei M 2010, Ab initio studies on atomic and electronic structures of black phosphorus, Journal of Applied Physics, vol. 107, no. 9, pp. 093718–1–4, doi:10.1063/1.3386509
Dumas JBA 1828, Traité de Chimie Appliquée aux Arts, Béchet Jeune, Paris
Dumas JBA 1859, Mémoire sur les Équivalents des Corps Simples, Mallet-Bachelier, Paris
Dupasquier A 1844, Traité élémentaire de chimie industrielle, Charles Savy Juene, Lyon
Eagleson M 1994, Concise Encyclopedia Chemistry, Walter de Gruyter, Berlin, ISBN 3-11-011451-8
Earl B & Wilford D 2021, Cambridge O Level Chemistry, Hodder Education, London, ISBN 978-1-3983-1059-9
Edwards PP 2000, "What, why and when is a metal?", in Hall N (ed.), The New Chemistry, Cambridge University, Cambridge, pp. 85–114, ISBN 978-0-521-45224-3
Engesser TA & Krossing I 2013, "Recent advances in the syntheses of homopolyatomic cations of the non metallic elements C, N, P, S, Cl, Br, I and Xe", Coordination Chemistry Reviews, vol. 257, nos. 5–6, pp. 946–955, doi:10.1016/j.ccr.2012.07.025
Erman P & Simon P 1808, "Third report of Prof. Erman and State Architect Simon on their joint experiments", Annalen der Physik, vol. 28, no. 3, pp. 347–367
Evans RC 1966, An Introduction to Crystal Chemistry, 2nd ed., Cambridge University, Cambridge
Faraday M 1853, The Subject Matter of a Course of Six Lectures on the Non-metallic Elements, (arranged by John Scoffern), Longman, Brown, Green, and Longmans, London
Field JE (ed.) 1979, The Properties of Diamond, Academic Press, London, ISBN 978-0-12-255350-9
Fortescue JAC 2012, Environmental Geochemistry: A Holistic Approach, Springer-Verlag, New York, ISBN 978-1-4612-6047-9
Fox M 2010, Optical Properties of Solids, 2nd ed., Oxford University Press, New York, ISBN 978-0-19-957336-3
Fraps GS 1913, Principles of Agricultural Chemistry, The Chemical Publishing Company, Easton, PA
Fraústo da Silva JJR & Williams RJP 2001, The Biological Chemistry of the Elements: The Inorganic Chemistry of Life, 2nd ed., Oxford University Press, Oxford, ISBN 978-0-19-850848-9
Gaffney J & Marley N 2017, General Chemistry for Engineers, Elsevier, Amsterdam, ISBN 978-0-12-810444-6
Ganguly A 2012, Fundamentals of Inorganic Chemistry, 2nd ed., Dorling Kindersley (India), New Delhi ISBN 978-81-317-6649-1
Gargaud M et al. (eds.) 2006, Lectures in Astrobiology, vol. 1, part 1: The Early Earth and Other Cosmic Habitats for Life, Springer, Berlin, ISBN 978-3-540-29005-6
Georgievskii VI 1982, Mineral compositions of bodies and tissues of animals, in Georgievskii VI, Annenkov BN & Samokhin VT (eds), Mineral Nutrition of Animals: Studies in the Agricultural and Food Sciences, Butterworths, London, ISBN 978-0-408-10770-9
Gillespie RJ, Robinson EA 1959, The sulfuric acid solvent system, in Emeléus HJ, Sharpe AG (eds), Advances in Inorganic Chemistry and Radiochemistry, vol. 1, pp. 386–424, Academic Press, New York
Glinka N 1960, General chemistry, Sobolev D (trans.), Foreign Languages Publishing House, Moscow
Godfrin H & Lauter HJ 1995, "Experimental properties of 3He adsorbed on graphite", in Halperin WP (ed.), Progress in Low Temperature Physics, volume 14, Elsevier Science B.V., Amsterdam, ISBN 978-0-08-053993-5
Godovikov AA & Nenasheva N 2020, Structural-chemical Systematics of Minerals, 3rd ed., Springer, Cham, Switzerland, ISBN 978-3-319-72877-3
Goldwhite H & Spielman JR 1984, College Chemistry, Harcourt Brace Jovanovich, San Diego, ISBN 978-0-15-601561-5
Goodrich BG 1844, A Glance at the Physical Sciences, Bradbury, Soden & Co., Boston
Gresham et al. 2015, Lubrication and lubricants, in Kirk-Othmer Encyclopedia of Chemical Technology, John Wiley & Sons, doi:10.1002/0471238961.1221021802151519.a01.pub3, accessed Jun 3, 2024
Grondzik WT et al. 2010, Mechanical and Electrical Equipment for Buildings, 11th ed., John Wiley & Sons, Hoboken, ISBN 978-0-470-19565-9
Graves Jr JL 2022, A Voice in the Wilderness: A Pioneering Biologist Explains How Evolution Can Help Us Solve Our Biggest Problems, Basic Books, New York, ISBN 978-1-6686-1610-9,
Green D 2012, The Elements, Scholastic, Southam, Warwickshire, ISBN 978-1-4071-3155-9
Greenberg A 2007, From alchemy to chemistry in picture and story, John Wiley & Sons, Hoboken, NJ, 978-0-471-75154-0
Greenwood NN 2001, Main group element chemistry at the millennium, Journal of the Chemical Society, Dalton Transactions, no. 14, pp. 2055–66, doi:10.1039/b103917m
Greenwood NN & Earnshaw A 2002, Chemistry of the Elements, 2nd ed., Butterworth-Heinemann, ISBN 978-0-7506-3365-9
Hampel CA & Hawley GG 1976, Glossary of Chemical Terms, Van Nostrand Reinhold, New York, ISBN 978-0-442-23238-2
Hanley JJ & Koga KT 2018, "Halogens in terrestrial and cosmic geochemical systems: Abundances, geochemical behaviors, and analytical methods" in The Role of Halogens in Terrestrial and Extraterrestrial Geochemical Processes: Surface, Crust, and Mantle, Harlov DE & Aranovich L (eds.), Springer, Cham, ISBN 978-3-319-61667-4
Harbison RD, Bourgeois MM & Johnson GT 2015, Hamilton and Hardy's Industrial Toxicology, 6th ed., John Wiley & Sons, Hoboken, ISBN 978-0-470-92973-5
Hare RA & Bache F 1836, Compendium of the Course of Chemical Instruction in the Medical Department of the University of Pennsylvania, 3rd ed., JG Auner, Philadelphia
Harris TM 1803, The Minor Encyclopedia, vol. III, West & Greenleaf, Boston
Hein M & Arena S 2011, Foundations of College Chemistry, 13th ed., John Wiley & Sons, Hoboken, New Jersey, ISBN 978-0470-46061-0
Herman ZS 1999, "The nature of the chemical bond in metals, alloys, and intermetallic compounds, according to Linus Pauling", in Maksić, ZB, Orville-Thomas WJ (eds.), 1999, Pauling's Legacy: Modern Modelling of the Chemical Bond, Elsevier, Amsterdam, doi:10.1016/S1380-7323(99)80030-2
House JE 2008, Inorganic Chemistry, Elsevier, Amsterdam, ISBN 978-0-12-356786-4
House JE 2013, Inorganic Chemistry, 2nd ed., Elsevier, Kidlington, ISBN 978-0-12-385110-9
Huang Y 2018, Thermodynamics of materials corrosion, in Huang Y & Zhang J (eds), Materials Corrosion and Protection, De Gruyter, Boston, pp. 25–58, doi:10.1515/9783110310054-002
Humphrey TPJ 1908, "Systematic course of study, Chemistry and physics", Pharmaceutical Journal, vol. 80, p. 58
Hussain et al. 2023, "Tuning the electronic properties of molybdenum di-sulphide monolayers via doping using first-principles calculations", Physica Scripta, vol. 98, no. 2, doi:10.1088/1402-4896/acacd1
Imberti C & Sadler PJ, 2020, "150 years of the periodic table: New medicines and diagnostic agents", in Sadler PJ & van Eldik R 2020, Advances in Inorganic Chemistry, vol. 75, Academic Press, ISBN 978-0-12-819196-5
Janas D, Cabrero-Vilatela, A & Bulmer J 2013, "Carbon nanotube wires for high-temperature performance", Carbon, vol. 64, pp. 305–314, doi:10.1016/j.carbon.2013.07.067
Jenkins GM & Kawamura K 1976, Polymeric Carbons—Carbon Fibre, Glass and Char, Cambridge University Press, Cambridge, ISBN 978-0-521-20693-8
Jentzsch AV & Matile S 2015, "Anion transport with halogen bonds", in Metrangolo P & Resnati G (eds.), Halogen Bonding I: Impact on Materials Chemistry and Life Sciences, Springer, Cham, ISBN 978-3-319-14057-5
Kneen WR, Rogers MJW & Simpson P 1972, Chemistry: Facts, Patterns, and Principles, Addison-Wesley, London, ISBN 978-0-201-03779-1
Knight J 2002, Science of Everyday Things: Real-life chemistry, Gale Group, Detroit, ISBN 9780787656324
Koenig SH 1962, in Proceedings of the International Conference on the Physics of Semiconductors, held at Exeter, July 16–20, 1962, The Institute of Physics and the Physical Society, London
Kosanke et al. 2012, Encyclopedic Dictionary of Pyrotechnics (and Related Subjects), Part 3 – P to Z, Pyrotechnic Reference Series No. 5, Journal of Pyrotechnics, Whitewater, Colorado, ISBN 978-1-889526-21-8
Labinger JA 2019, "The history (and pre-history) of the discovery and chemistry of the noble gases", in Giunta CJ, Mainz VV & Girolami GS (eds.), 150 Years of the Periodic Table: A Commemorative Symposium, Springer Nature, Cham, Switzerland, ISBN 978-3-030-67910-1
Lanford OE 1959, Using Chemistry, McGraw-Hill, New York
Larrañaga MD, Lewis RJ & Lewis RA 2016, Hawley's Condensed Chemical Dictionary, 16th ed., Wiley, Hoboken, New York, ISBN 978-1-118-13515-0
Lavoisier A 1790, Elements of Chemistry, R Kerr (trans.), William Creech, Edinburgh
Lee JD 1996, Concise Inorganic Chemistry, 5th ed., Blackwell Science, Oxford, ISBN 978-0-632-05293-6
Lémery N 1699, Traité universel des drogues simples, mises en ordre alphabetique, L d'Houry, Paris, p. 118
Lewis RJ 1993, Hawley's Condensed Chemical Dictionary, 12th ed., Van Nostrand Reinhold, New York, ISBN 978-0-442-01131-4
Maosheng M 2020, "Noble gases in solid compounds show a rich display of chemistry with enough pressure", Frontiers in Chemistry, vol. 8, doi:10.3389/fchem.2020.570492
Maroni M, Seifert B & Lindvall T (eds) 1995, "Physical pollutants", in Indoor Air Quality: A Comprehensive Reference Book, Elsevier, Amsterdam, ISBN 978-0-444-81642-9
Martin JW 1969, Elementary Science of Metals, Wykeham Publications, London
Matson M & Orbaek AW 2013, Inorganic Chemistry for Dummies, John Wiley & Sons: Hoboken, ISBN 978-1-118-21794-8
Mingos DMP 2019, "The discovery of the elements in the Periodic Table", in Mingos DMP (ed.), The Periodic Table I. Structure and Bonding, Springer Nature, Cham, doi:10.1007/978-3-030-40025-5
Moeller T 1958, Qualitative Analysis: An Introduction to Equilibrium and Solution Chemistry, McGraw-Hill, New York
Moeller T et al. 1989, Chemistry: With Inorganic Qualitative Analysis, 3rd ed., Academic Press, New York, ISBN 978-0-12-503350-3
Moody B 1991, Comparative Inorganic Chemistry, 3rd ed., Edward Arnold, London, ISBN 978-0-7131-3679-1
Moore JT 2016, Chemistry for Dummies, 2nd ed., ch. 16, Tracking periodic trends, John Wiley & Sons: Hoboken, ISBN 978-1-119-29728-4
Morely HF & Muir MM 1892, Watt's Dictionary of Chemistry, vol. 3, Longman's Green, and Co., London
Moss, TS 1952, Photoconductivity in the Elements, Butterworths Scientific, London
Orisakwe OE 2012, Other heavy metals: antimony, cadmium, chromium and mercury, in Pacheco-Torgal F, Jalali S & Fucic A (eds), Toxicity of Building Materials, Woodhead Publishing, Oxford, pp. 297–333, doi:10.1533/9780857096357.297
Parameswaran P et al. 2020, "Phase evolution and characterization of mechanically alloyed hexanary Al16.6Mg16.6Ni16.6Cr16.6Ti16.6Mn16.6 high entropy alloy", Metal Powder Report, vol. 75, no. 4, doi:10.1016/j.mprp.2019.08.001
Parish RV 1977, The Metallic Elements, Longman, London, ISBN 978-0-582-44278-8
Partington JR 1944, A Text-book of Inorganic Chemistry, 5th ed., Macmillan & Co., London
Partington JR 1964, A history of chemistry, vol. 4, Macmillan, London
Pascoe KJ 1982, An Introduction to the Properties of Engineering Materials, 3rd ed., Von Nostrand Reinhold (UK), Wokingham, Berkshire, ISBN 978-0-442-30233-7
Pauling L 1947, General chemistry: An introduction to descriptive chemistry and modern chemical theory, WH Freeman, San Francisco
Pawlicki T, Scanderbeg DJ & Starkschall G 2016, Hendee's Radiation Therapy Physics, 4th ed., John Wiley & Sons, Hoboken, NJ, p. 228, ISBN 978-0-470-37651-5
Porterfield WW 1993, Inorganic Chemistry, Academic Press, San Diego, ISBN 978-0-12-562980-5
Povh B & Rosina M 2017, Scattering and Structures: Essentials and Analogies in Quantum Physics, 2nd ed., Springer, Berlin, doi:10.1007/978-3-662-54515-7
Powell P & Timms P 1974, The Chemistry of the Non-Metals, Chapman and Hall, London, ISBN 978-0-412-12200-2
Power PP 2010, Main-group elements as transition metals, Nature, vol. 463, 14 January 2010, pp. 171–177, doi:10.1038/nature08634
Puddephatt RJ & Monaghan PK 1989, The Periodic Table of the Elements, 2nd ed., Clarendon Press, Oxford, ISBN 978-0-19-855516-2
Rayner-Canham G 2018, "Organizing the transition metals", in Scerri E & Restrepo G (Ed's.) Mendeleev to Oganesson: A multidisciplinary perspective on the periodic table, Oxford University, New York, ISBN 978-0-190-668532
Rayner-Canham G 2020, The Periodic Table: Past, Present and Future, World Scientific, New Jersey, ISBN 978-981-121-850-7
Redmer R, Hensel F & Holst B (eds) 2010, "Metal-to-Nonmetal Transitions", Springer, Berlin, ISBN 978-3-642-03952-2
Regnault MV 1853, Elements of Chemistry, vol. 1, 2nd ed., Clark & Hesser, Philadelphia
Reilly C 2002, Metal Contamination of Food, Blackwell Science, Oxford, ISBN 978-0-632-05927-0
Restrepo G, Llanos EJ & Mesa H 2006, "Topological space of the chemical elements and its properties", Journal of Mathematical Chemistry, vol. 39, doi:10.1007/s10910-005-9041-1
Rieck GD 1967, Tungsten and its Compounds, Pergamon Press, Oxford
Rochow EG 1966, The Metalloids, DC Heath and Company, Boston
Rosenberg E 2013, Germanium-containing compounds, current knowledge and applications, in Kretsinger RH, Uversky VN & Permyakov EA (eds), Encyclopedia of Metalloproteins, Springer, New York, doi:10.1007/978-1-4614-1533-6_582
Roscoe HE & Schorlemmer FRS 1894, A Treatise on Chemistry: Volume II: The Metals, D Appleton, New York
Salinas JT 2019 Exploring Physical Science in the Laboratory, Moreton Publishing, Englewood, Colorado, ISBN 978-1-61731-753-8
Salzberg HW 1991, From Caveman to Chemist: Circumstances and Achievements, American Chemical Society, Washington, DC, ISBN 0-8412-1786-6
Sanderson RT 1967, Inorganic Chemistry, Reinhold, New York
Scerri E (ed.) 2013, 30-Second Elements: The 50 Most Significant Elements, Each Explained In Half a Minute, Ivy Press, London, ISBN 978-1-84831-616-4
Scerri E 2020, The Periodic Table: Its Story and Its Significance, Oxford University Press, New York, ISBN 978-0-19091-436-3
Schaefer JC 1968, "Boron" in Hampel CA (ed.), The Encyclopedia of the Chemical Elements, Reinhold, New York
Schmedt auf der Günne J, Mangstl M & Kraus F 2012, "Occurrence of difluorine F2 in nature—In situ proof and quantification by NMR spectroscopy", Angewandte Chemie International Edition, vol. 51, no. 31, doi:10.1002/anie.201203515
Schweitzer GK & Pesterfield LL 2010, Aqueous Chemistry of the Elements, Oxford University Press, Oxford, ISBN 978-0-19-539335-4
Scott D 2014, Around the World in 18 Elements, Royal Society of Chemistry, e-book, ISBN 978-1-78262-509-4
Scott EC & Kanda FA 1962, The Nature of Atoms and Molecules: A General Chemistry, Harper & Row, New York
Scott WAH 2001, Chemistry Basic Facts, 5th ed., HarperCollins, Glasgow, ISBN 978-0-00-710321-8
Segal BG 1989, Chemistry: Experiment and Theory, 2nd ed., John Wiley & Sons, New York, ISBN 0-471-84929-4
Shanabrook BV, Lannin JS & Hisatsune IC 1981, "Inelastic light scattering in a onefold-coordinated amorphous semiconductor", Physical Review Letters, vol. 46, no. 2, 12 January, doi:10.1103/PhysRevLett.46.130
Shang et al. 2021, "Ultrahard bulk amorphous carbon from collapsed fullerene", Nature, vol. 599, pp. 599–604, doi:10.1038/s41586-021-03882-9
Shchukarev SA 1977, New views of D. I. Mendeleev's system. I. Periodicity of the stratigraphy of atomic electronic shells in the system, and the concept of Kainosymmetry", Zhurnal Obshchei Kimii, vol. 47, no. 2, pp. 246–259
Shkol’nikov EV 2010, "Thermodynamic characterization of the amphoterism of oxides M2O3 (M = AS, Sb, Bi) and their hydrates in aqueous media, Russian Journal of Applied Chemistry, vol. 83, no. 12, pp. 2121–2127, doi:10.1134/S1070427210120104
Sidorov TA 1960, "The connection between structural oxides and their tendency to glass formation", Glass and Ceramics, vol. 17, no. 11, doi:10.1007BF00670116
Siekierski S & Burgess J 2002, Concise Chemistry of the Elements, Horwood Press, Chichester, ISBN 978-1-898563-71-6
Slye OM Jr 2008, "Fire extinguishing agents", in Ullmann's Encyclopedia of Industrial Chemistry,doi:10.1002/14356007.a11_113.pub2
Smith A 1906, Introduction to Inorganic Chemistry, The Century Co., New York
Smith A & Dwyer C 1991, Key Chemistry: Investigating Chemistry in the Contemporary World: Book 1: Materials and Everyday Life, Melbourne University Press, Carlton, Victoria, ISBN 978-0-522-84450-4
Smits et al. 2020, "Oganesson: A noble gas element that is neither noble nor a gas", Angewandte Chemie International Edition, vol. 59, pp. 23636–23640, doi:10.1002/anie.202011976
Smulders E & Sung E 2011, "Laundry Detergents, 2, Ingredients and Products’’, In Ullmann's Encyclopedia of Industrial Chemistry,doi:10.1002/14356007.o15_o13
Spencer JN, Bodner GM, Rickard LY 2012, Chemistry: Structure & Dynamics, 5th ed., John Wiley & Sons, Hoboken, ISBN 978-0-470-58711-9
Steudel R 2020, Chemistry of the Non-metals: Syntheses – Structures – Bonding – Applications, in collaboration with D Scheschkewitz, Berlin, Walter de Gruyter, doi:10.1515/9783110578065
Taniguchi M, Suga S, Seki M, Sakamoto H, Kanzaki H, Akahama Y, Endo S, Terada S & Narita S 1984, "Core-exciton induced resonant photoemission in the covalent semiconductor black phosphorus", Solid State Communications, vo1. 49, no. 9, pp. 867–7, doi:10.1016/0038-1098(84)90441-1
Taylor MD 1960, First Principles of Chemistry, Van Nostrand, Princeton
The Chemical News and Journal of Physical Science 1897, "Notices of books: A Manual of Chemistry, Theoretical and Practical", by WA Tilden", vol. 75, pp. 188–189
Vij et al. 2001, Polynitrogen chemistry. Synthesis, characterization, and crystal structure of surprisingly stable fluoroantimonate salts of N5+. Journal of the American Chemical Society, vol. 123, no. 26, pp. 6308−6313, doi:10.1021/ja010141g
Wächtershäuser G 2014, "From chemical invariance to genetic variability", in Weigand W and Schollhammer P (eds.), Bioinspired Catalysis: Metal Sulfur Complexes, Wiley-VCH, Weinheim, doi:10.1002/9783527664160.ch1
Wang HS, Lineweaver CH & Ireland TR 2018, The elemental abundances (with uncertainties) of the most Earth-like planet, Icarus, vol. 299, pp. 460–474, doi:10.1016/j.icarus.2017.08.024
Wasewar KL 2021, "Intensifying approaches for removal of selenium", in Devi et al. (eds.), Selenium contamination in water, John Wiley & Sons, Hoboken, pp. 319–355, ISBN 978-1-119-69354-3
Weeks ME & Leicester HM 1968, Discovery of the Elements, 7th ed., Journal of Chemical Education, Easton, Pennsylvania
Weetman C & Inoue S 2018, The road travelled: After main-group elements as transition metals, ChemCatChem, vol. 10, no. 19, pp. 4213–4228, doi:10.1002/cctc.201800963
Welcher SH 2009, High marks: Regents Chemistry Made Easy, 2nd ed., High Marks Made Easy, New York, ISBN 978-0-9714662-0-3
Weller et al. 2018, Inorganic Chemistry, 7th ed., Oxford University Press, Oxford, ISBN 978-0-19-252295-5
Wells AF 1984, Structural Inorganic Chemistry, 5th ed., Clarendon Press, Oxford, ISBN 978-0-19-855370-0
White JH 1962, Inorganic Chemistry: Advanced and Scholarship Levels, University of London Press, London
Whiteford GH & and Coffin RG 1939, Essentials of College Chemistry, 2nd ed., Mosby Co., St Louis
Whitten KW & Davis RE 1996, General Chemistry, 5th ed., Saunders College Publishing, Philadelphia, ISBN 978-0-03-006188-2
Wibaut P 1951, Organic Chemistry, Elsevier Publishing Company, New York
Windmeier C & Barron RF 2013, "Cryogenic technology", in Ullmann's Encyclopedia of Industrial Chemistry,doi:10.1002/14356007.b03_20.pub2
Winstel G 2000, "Electroluminescent materials and devices", in Ullmann's Encyclopedia of Industrial Chemistry,doi:10.1002/14356007.a09_255
Wismer RK 1997, Student Study Guide, General Chemistry: Principles and Modern Applications, 7th ed., Prentice Hall, Upper Saddle River, ISBN 978-0-13-281990-9
Woodward et al. 1999, "The electronic structure of metal oxides", In Fierro JLG (ed.), Metal Oxides: Chemistry and Applications, CRC Press, Boca Raton, ISBN 1-4200-2812-X
Wulfsberg G 2000, Inorganic Chemistry, University Science Books, Sausalito, California, ISBN 978-1-891389-01-6
Yamaguchi M & Shirai Y 1996, "Defect structures", in Stoloff NS & Sikka VK (eds.), Physical Metallurgy and Processing of Intermetallic Compounds, Chapman & Hall, New York, ISBN 978-1-4613-1215-4
Yang J 2004, "Theory of thermal conductivity", in Tritt TM (ed.), Thermal Conductivity: Theory, Properties, and Applications, Kluwer Academic/Plenum Publishers, New York, pp. 1–20, ISBN 978-0-306-48327-1
Yin et al. 2018, Hydrogen-assisted post-growth substitution of tellurium into molybdenum disulfide monolayers with tunable compositions, Nanotechnology, vol. 29, no 14, doi:10.1088/1361-6528/aaabe8
Yoder CH, Suydam FH & Snavely FA 1975, Chemistry, 2nd ed, Harcourt Brace Jovanovich, New York, ISBN 978-0-15-506470-6
Zhu et al. 2022, Introduction: basic concept of boron and its physical and chemical properties, in Fundamentals and Applications of Boron Chemistry, vol. 2, Zhu Y (ed.), Elsevier, Amsterdam, ISBN 978-0-12-822127-3
Zumdahl SS & DeCoste DJ 2010, Introductory Chemistry: A Foundation, 7th ed., Cengage Learning, Mason, Ohio, ISBN 978-1-111-29601-8